/live/media/ZO/ZO_26237_Kit.jpg)
Gates 26237 Turbocharger Intercooler Hose Kit - Pipe to Engine (Cold Side)
| Brand | Gates 26237 |
|---|---|
| Position | Pipe to Engine (Cold Side) |
| 75 | |
| Bolt Type | .25 in. - 28 Male Pipe Thread |
| Centerline Length | 4.02 |
| Centerline Length | 102 |
| Centerline Length (in) | 4.02 |
| Centerline Length (mm) | 102 |
| Clamp 1 - Band Width (in) | .75 |
| Clamp 1 - Band Width (mm) | 19.1 |
| Clamp 1 - Bolt Type | .25 in. - 28 Male Pipe Thread |
| Clamp 1 - Clamping Range Max (in) | 3.9375 |
| Clamp 1 - Clamping Range Max (mm) | 100.1 |
| Clamp 1 - Clamping Range Min (in) | 3.625 |
| Clamp 1 - Clamping Range Min (mm) | 92.2 |
| Clamp 1 - Nut Type | .4375 in. Hex-Head |
| Clamp 1 - Recommended Torque (in/lbs) | 75 |
| Clamp 2 - Band Width (in) | .75 |
| Clamp 2 - Band Width (mm) | 19.1 |
| Clamp 2 - Bolt Type | .25 in. - 28 Male Pipe Thread |
| Clamp 2 - Clamping Range Max (in) | 3.9375 |
| Clamp 2 - Clamping Range Max (mm) | 100.1 |
| Clamp 2 - Clamping Range Min (in) | 3.625 |
| Clamp 2 - Clamping Range Min (mm) | 92.2 |
| Clamp 2 - Nut Type | .4375 in. Hex-Head |
| Clamp 2 - Recommended Torque (in/lbs) | 75 |
| Clamp Band Width | .75 |
| Clamp Band Width | 19.1 |
| Contents | 1 Turbocharger Hose, 2 T-Bolt Clamps |
| End 1 Inside Diameter | 3.5 |
| End 1 Inside Diameter | 89 |
| End 2 Inside Diameter | 3.5 |
| End 2 Inside Diameter | 89 |
| Inside Diameter 1 (in) | 3.5 |
| Inside Diameter 1 (mm) | 89 |
| Inside Diameter 2 (in) | 3.5 |
| Inside Diameter 2 (mm) | 89 |
| Maximum Clamping Length | 3.9375 |
| Maximum Clamping Length | 100.1 |
| Minimum Clamping Length | 3.625 |
| Minimum Clamping Length | 92.2 |
| Number of Rings | 1 |
| Nut Type | .4375 in. Hex-Head |
| OE Comparison Rating | OE Improved |
| Ring Quantity | 1 |
| Product line | Turbocharger Hose Kits (Molded) |
| Fits | Dodge · 5 vehicles |
OE improved. A superior alternative to original replacement hoses.
Complete hose kit. Replaces the turbocharger hose system in one purchase.
Includes T-bolt clamps. Comes with two clamps for a secure connection.
Cross-references Gates 26237, 55056695AB and 55056695AC for the same application. See all 3.
Gates 26237 Turbocharger Hose Kit
Gates 26237 is a molded turbocharger hose kit for replacing the turbocharger hose system on select Ram diesel applications. It is built as an OE-improved replacement for the cold-side pipe-to-engine connection, with molded hose geometry and T-bolt clamping for a secure fit.
Key Features
- Fits 2007-2009 Dodge Ram 2500, pipe to engine (cold side)
- Fits 2007-2008 Dodge Ram 3500, pipe to engine (cold side)
- 3.5 in. inside diameter at both ends for the specified turbocharger hose connection
- 4.02 in. centerline length for the molded hose profile
- OE Improved comparison rating for a replacement-focused application
- Includes Gates 26237 hose kit components for turbocharger hose replacement
- Clamp specs: 19.1 mm band width, 92.2 mm to 100.1 mm clamping range, 75 in/lbs recommended torque
Detailed Description
This Gates Turbocharger Hose Kit is part of the Gates Turbocharger Hose Kits (Molded) line, created for complete turbocharger hose system replacement rather than piecing together individual hose repairs. Gates 26237 uses a molded hose shape to match the cold-side pipe-to-engine routing on the Ram 2500 and Ram 3500 diesel applications listed below, helping maintain proper connection geometry and clamp load at the turbocharger plumbing interface. This part cross-references Mopar 55056695AB and 55056695AC for the same application.
Compatible With 2007-2009 Dodge Ram 2500, pipe to engine (cold side), and 2007-2008 Dodge Ram 3500, pipe to engine (cold side). The hose measures 3.5 inches inside diameter at both ends, with a 4.02 inch centerline length and clamp ranges from 3.625 to 3.9375 inches. Gates 26237 is a direct-fit service part for owners searching for a molded turbocharger hose kit for Dodge Ram 2500 cold side replacement or Dodge Ram 3500 turbocharger hose repair.
Common Uses
- Replacing a cracked or split cold-side turbocharger hose
- Restoring boost-air routing after hose swelling or softening
- Addressing clamp sealing issues at the pipe-to-engine connection
- Repairing a damaged molded hose section in the turbocharger plumbing
- Servicing OE-style turbocharger hose routing on Ram diesel trucks
Installation Notes
Verify hose diameter, centerline length, and clamp range before installation. Clean the mating surfaces and inspect the pipe ends for wear, deformation, or contamination that could affect sealing. Follow the specified clamp torque of 75 in/lbs for the included T-bolt clamps and confirm the hose seats evenly at the cold-side connection.
Quality Assurance
Gates is known for producing engineered replacement components for demanding underhood applications, and the 26237 kit reflects that OE-improved approach for turbocharger hose service. The molded construction and application-specific dimensions are intended to support consistent fitment on the listed Dodge Ram 2500 and Dodge Ram 3500 models.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2009 | Dodge | Ram 2500 | 5.9L | L6 | DIESEL | Pipe to Engine (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2008 | Dodge | Ram 2500 | 5.9L | L6 | DIESEL | Pipe to Engine (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2008 | Dodge | Ram 3500 | 5.9L | L6 | DIESEL | Pipe to Engine (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2007 | Dodge | Ram 2500 | 5.9L | L6 | DIESEL | Pipe to Engine (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2007 | Dodge | Ram 3500 | 5.9L | L6 | DIESEL | Pipe to Engine (Cold Side) | Turbocharger Hose Kits (Molded) |
| No rows match your filter. | |||||||