/live/media/ZO/ZO_26260_Top.jpg)
Gates 26260 Turbocharger Intercooler Hose Kit - Pipe to Engine (Cold Side)
| Brand | Gates 26260 |
|---|---|
| Position | Pipe to Engine (Cold Side) |
| 75 | |
| Bolt Type | .25 in. - 28 Male Pipe Thread |
| Centerline Length | 4.5 |
| Centerline Length | 114 |
| Centerline Length (in) | 4.5 |
| Centerline Length (mm) | 114 |
| Clamp 1 - Band Width (in) | .75 |
| Clamp 1 - Band Width (mm) | 19.1 |
| Clamp 1 - Bolt Type | .25 in. - 28 Male Pipe Thread |
| Clamp 1 - Clamping Range Max (in) | 2.8125 |
| Clamp 1 - Clamping Range Max (mm) | 71.4 |
| Clamp 1 - Clamping Range Min (in) | 2.5 |
| Clamp 1 - Clamping Range Min (mm) | 63.5 |
| Clamp 1 - Nut Type | .4375 in. Hex-Head |
| Clamp 1 - Recommended Torque (in/lbs) | 75 |
| Clamp 2 - Band Width (in) | .75 |
| Clamp 2 - Band Width (mm) | 19.1 |
| Clamp 2 - Bolt Type | .25 in. - 28 Male Pipe Thread |
| Clamp 2 - Clamping Range Max (in) | 2.8125 |
| Clamp 2 - Clamping Range Max (mm) | 71.4 |
| Clamp 2 - Clamping Range Min (in) | 2.5 |
| Clamp 2 - Clamping Range Min (mm) | 63.5 |
| Clamp 2 - Nut Type | .4375 in. Hex-Head |
| Clamp 2 - Recommended Torque (in/lbs) | 75 |
| Clamp Band Width | .75 |
| Clamp Band Width | 19.1 |
| Contents | 1 Turbocharger Hose, 2 T-Bolt Clamps |
| End 1 Inside Diameter | 2.347 |
| End 1 Inside Diameter | 60 |
| End 2 Inside Diameter | 2.347 |
| End 2 Inside Diameter | 60 |
| Inside Diameter 1 (in) | 2.347 |
| Inside Diameter 1 (mm) | 60 |
| Inside Diameter 2 (in) | 2.347 |
| Inside Diameter 2 (mm) | 60 |
| Maximum Clamping Length | 2.8125 |
| Maximum Clamping Length | 71.4 |
| Minimum Clamping Length | 2.5 |
| Minimum Clamping Length | 63.5 |
| Number of Rings | 0 |
| Nut Type | .4375 in. Hex-Head |
| OE Comparison Rating | OE Improved |
| Ring Quantity | 0 |
| Product line | Turbocharger Hose Kits (Molded) |
| Fits | Chevrolet and GMC · 12 vehicles |
OE improved. A superior alternative to original replacement hoses.
One-stop kit. Replaces the turbocharger hose system in one purchase.
T-bolt clamps included. Two clamps help secure the hose connection.
Cross-references Gates 26260, 15198167 and 15743619 for the same application. See all 3.
Gates 26260 Turbocharger Hose Kit
Gates 26260 is a molded turbocharger hose kit for replacing the cold-side pipe-to-engine hose on select Chevrolet Silverado 2500 HD, Silverado 3500, GMC Sierra 2500 HD, and Sierra 3500 diesel applications. Built as an OE-improved replacement, it addresses complete turbocharger hose system replacement with a molded hose and clamp package matched to the application.
Key Features
- Molded turbocharger hose kit for the cold side pipe-to-engine connection
- OE Improved comparison rating for a replacement-focused upgrade path
- Hose inside diameter: 2.347 in. (60 mm) at both ends
- Centerline length: 4.5 in. (114 mm)
- Clamp 1 and Clamp 2 use 0.75 in. band width with 2.5-2.8125 in. clamping range
- Clamp hardware specs: .25 in. - 28 male pipe thread bolt type and .4375 in. hex-head nut type
- Clamp recommended torque: 75 in/lbs
- Contents: 1 turbocharger hose, 2 T-bolt clamps
Product Details
Gates Turbocharger Hose Kits (Molded) are built for buyers who need to replace the full turbocharger hose system rather than patch a single connection. Part number 26260 uses a molded hose profile to match the cold-side routing on the listed Chevrolet and GMC trucks, helping maintain a secure fit at the pipe-to-engine connection. This Gates 26260 kit is a direct replacement choice for 2002-2004 Chevrolet Silverado 2500 HD, 2002-2004 Chevrolet Silverado 3500, 2002-2004 GMC Sierra 2500 HD, and 2002-2004 GMC Sierra 3500 applications.
This part cross-references OE numbers 15198167 and 15743619 for the same application.
What It Is Used For
- Replacing a cracked or split cold-side turbocharger hose
- Restoring a leaking pipe-to-engine turbo connection
- Correcting boost loss caused by hose deterioration
- Addressing clamp sealing issues at the turbocharger hose joint
- Replacing an OE-style hose assembly on diesel truck applications
Installation Notes and Tips
Verify the hose routing, end diameters, and clamping range before installation. Use the specified clamp torque of 75 in/lbs and confirm the hose seats evenly on both ends before final tightening. For best results, inspect the mating pipes and connection surfaces for wear, deformation, or contamination before installing the new hose.
Quality Assurance
Gates positions this molded turbocharger hose kit as an OE-improved replacement built from the company’s long-running focus on hose-system engineering and durability. The molded construction and application-specific clamp sizing support a service replacement that matches the listed truck fitment.
Compatible Vehicles
- Fits 2002-2004 Chevrolet Silverado 2500 HD, Pipe to Engine (Cold Side)
- Fits 2002-2004 Chevrolet Silverado 3500, Pipe to Engine (Cold Side)
- Fits 2002-2004 GMC Sierra 2500 HD, Pipe to Engine (Cold Side)
- Fits 2002-2004 GMC Sierra 3500, Pipe to Engine (Cold Side)
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2004 | Chevrolet | Silverado 2500 HD | 6.6L | V8 | DIESEL | Pipe to Engine (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2004 | Chevrolet | Silverado 3500 | 6.6L | V8 | DIESEL | Pipe to Engine (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2004 | GMC | Sierra 2500 HD | 6.6L | V8 | DIESEL | Pipe to Engine (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2004 | GMC | Sierra 3500 | 6.6L | V8 | DIESEL | Pipe to Engine (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2003 | Chevrolet | Silverado 2500 HD | 6.6L | V8 | DIESEL | Pipe to Engine (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2003 | Chevrolet | Silverado 3500 | 6.6L | V8 | DIESEL | Pipe to Engine (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2003 | GMC | Sierra 2500 HD | 6.6L | V8 | DIESEL | Pipe to Engine (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2003 | GMC | Sierra 3500 | 6.6L | V8 | DIESEL | Pipe to Engine (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2002 | Chevrolet | Silverado 2500 HD | 6.6L | V8 | DIESEL | Pipe to Engine (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2002 | Chevrolet | Silverado 3500 | 6.6L | V8 | DIESEL | Pipe to Engine (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2002 | GMC | Sierra 2500 HD | 6.6L | V8 | DIESEL | Pipe to Engine (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2002 | GMC | Sierra 3500 | 6.6L | V8 | DIESEL | Pipe to Engine (Cold Side) | Turbocharger Hose Kits (Molded) |
| No rows match your filter. | |||||||