/live/media/ZO/ZO_26262_Top.jpg)
Gates 26262 Turbocharger Intercooler Hose Kit - Intercooler to Pipe (Cold Side)
| Brand | Gates 26262 |
|---|---|
| Position | Intercooler to Pipe (Cold Side) |
| 75 | |
| Bolt Type | .25 in. - 28 Male Pipe Thread |
| Centerline Length | 7.28 |
| Centerline Length | 185 |
| Centerline Length (in) | 7.28 |
| Centerline Length (mm) | 185 |
| Clamp 1 - Band Width (in) | .75 |
| Clamp 1 - Band Width (mm) | 19.1 |
| Clamp 1 - Bolt Type | .25 in. - 28 Male Pipe Thread |
| Clamp 1 - Clamping Range Max (in) | 3.4375 |
| Clamp 1 - Clamping Range Max (mm) | 87.3 |
| Clamp 1 - Clamping Range Min (in) | 3.125 |
| Clamp 1 - Clamping Range Min (mm) | 79.4 |
| Clamp 1 - Nut Type | .4375 in. Hex-Head |
| Clamp 1 - Recommended Torque (in/lbs) | 75 |
| Clamp 2 - Band Width (in) | .75 |
| Clamp 2 - Band Width (mm) | 19.1 |
| Clamp 2 - Bolt Type | .25 in. - 28 Male Pipe Thread |
| Clamp 2 - Clamping Range Max (in) | 3.4375 |
| Clamp 2 - Clamping Range Max (mm) | 87.3 |
| Clamp 2 - Clamping Range Min (in) | 3.125 |
| Clamp 2 - Clamping Range Min (mm) | 79.4 |
| Clamp 2 - Nut Type | .4375 in. Hex-Head |
| Clamp 2 - Recommended Torque (in/lbs) | 75 |
| Clamp Band Width | .75 |
| Clamp Band Width | 19.1 |
| Contents | 1 Turbocharger Hose, 2 T-Bolt Clamps |
| End 1 Inside Diameter | 3 |
| End 1 Inside Diameter | 76 |
| End 2 Inside Diameter | 3 |
| End 2 Inside Diameter | 76 |
| Inside Diameter 1 (in) | 3 |
| Inside Diameter 1 (mm) | 76 |
| Inside Diameter 2 (in) | 3 |
| Inside Diameter 2 (mm) | 76 |
| Maximum Clamping Length | 3.4375 |
| Maximum Clamping Length | 87.3 |
| Minimum Clamping Length | 3.125 |
| Minimum Clamping Length | 79.4 |
| Number of Rings | 0 |
| Nut Type | .4375 in. Hex-Head |
| OE Comparison Rating | OE Improved |
| Ring Quantity | 0 |
| Product line | Turbocharger Hose Kits (Molded) |
| Fits | Chevrolet and GMC · 16 vehicles |
Molded hose kit. Replaces the turbocharger hose system as a complete assembly.
OE improved. A stronger alternative to original replacement hoses.
Includes clamps. Comes with two T-bolt clamps for a secure connection.
Cross-references Gates 26262, 15034797 and 15124210 for the same application. See all 4.
Gates 26262 Turbocharger Hose Kit
Gates 26262 is a molded turbocharger hose kit for replacing the cold-side intercooler-to-pipe hose on select heavy-duty Chevrolet and GMC diesel trucks. Built as an OE-improved replacement, it addresses the full hose assembly with a molded fit and application-specific clamp sizing for a direct service repair.
Key Features
- Molded turbocharger hose kit for the intercooler to pipe (cold side) connection
- 3 in. inside diameter at both ends for a matched turbo hose fit
- 7.28 in. centerline length for the specified routing
- Includes 3 in. T-bolt clamps with 19.1 mm band width
- Clamp range: 3.125 in. to 3.4375 in. for secure fastening
- OE Improved comparison rating for replacement service
- Gates part number 26262 for catalog and service lookup
Product Details
This Gates Turbocharger Hose Kit is built for 2002-2005 Chevrolet Silverado 2500 HD, 2002-2005 Chevrolet Silverado 3500, 2002-2005 GMC Sierra 2500 HD, and 2002-2005 GMC Sierra 3500 applications at the intercooler to pipe (cold side) position. The molded construction helps maintain the intended hose shape and routing, while the 3 in. ends, 185 mm centerline length, and included T-bolt clamps support a precise replacement on the turbocharger charge-air path. Gates 26262 is a practical choice when servicing a worn or damaged cold-side turbo hose on Silverado and Sierra diesel trucks.
Gates’ Turbocharger Hose Kits (Molded) line is focused on complete hose-system replacement rather than piecing together individual components. That approach helps simplify service on turbocharged diesel applications where hose shape, sealing, and clamp fit all matter for consistent charge-air routing.
Common Reasons for Replacement
- Cracked or split intercooler-to-pipe hose
- Boost leaks caused by worn hose material or loose sealing surfaces
- Collapsed or softened turbocharger hose under load
- Air loss at the cold-side charge-air connection
- Service replacement after inspection of the turbo hose system
Installation Notes
Verify the vehicle year, make, model, and intercooler-to-pipe (cold side) position before installation. Confirm the hose routing matches the molded shape and check clamp placement so the 3.125 in. to 3.4375 in. clamping range is centered on the connection. Clean the mating surfaces before tightening the T-bolt clamps to the specified 75 in/lbs torque.
Quality Assurance
Gates manufactures this hose kit as an OE-improved replacement for turbocharger hose service. This part cross-references GM service numbers 15034797 and 15124210 for the same application.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2005 | Chevrolet | Silverado 2500 HD | 6.6L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2005 | Chevrolet | Silverado 3500 | 6.6L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2005 | GMC | Sierra 2500 HD | 6.6L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2005 | GMC | Sierra 3500 | 6.6L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2004 | Chevrolet | Silverado 2500 HD | 6.6L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2004 | Chevrolet | Silverado 3500 | 6.6L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2004 | GMC | Sierra 2500 HD | 6.6L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2004 | GMC | Sierra 3500 | 6.6L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2003 | Chevrolet | Silverado 2500 HD | 6.6L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2003 | Chevrolet | Silverado 3500 | 6.6L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2003 | GMC | Sierra 2500 HD | 6.6L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2003 | GMC | Sierra 3500 | 6.6L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2002 | Chevrolet | Silverado 2500 HD | 6.6L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2002 | Chevrolet | Silverado 3500 | 6.6L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2002 | GMC | Sierra 2500 HD | 6.6L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2002 | GMC | Sierra 3500 | 6.6L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| No rows match your filter. | |||||||