/live/media/ZO/ZO_26279_Top.jpg)
Gates 26279 Turbocharger Intercooler Hose Kit - Pipe to Intercooler (Hot Side)
| Brand | Gates 26279 |
|---|---|
| Position | Pipe to Intercooler (Hot Side) |
| 75 | |
| Bolt Type | .25 in. - 28 Male Pipe Thread |
| Centerline Length | 11.75 |
| Centerline Length | 298 |
| Centerline Length (in) | 11.75 |
| Centerline Length (mm) | 298 |
| Clamp 1 - Band Width (in) | .75 |
| Clamp 1 - Band Width (mm) | 19.1 |
| Clamp 1 - Bolt Type | .25 in. - 28 Male Pipe Thread |
| Clamp 1 - Clamping Range Max (in) | 2.9375 |
| Clamp 1 - Clamping Range Max (mm) | 74.6 |
| Clamp 1 - Clamping Range Min (in) | 2.625 |
| Clamp 1 - Clamping Range Min (mm) | 66.7 |
| Clamp 1 - Nut Type | .4375 in. Hex-Head |
| Clamp 1 - Recommended Torque (in/lbs) | 75 |
| Clamp 2 - Band Width (in) | .75 |
| Clamp 2 - Band Width (mm) | 19.1 |
| Clamp 2 - Bolt Type | .25 in. - 28 Male Pipe Thread |
| Clamp 2 - Clamping Range Max (in) | 2.9375 |
| Clamp 2 - Clamping Range Max (mm) | 74.6 |
| Clamp 2 - Clamping Range Min (in) | 2.625 |
| Clamp 2 - Clamping Range Min (mm) | 66.7 |
| Clamp 2 - Nut Type | .4375 in. Hex-Head |
| Clamp 2 - Recommended Torque (in/lbs) | 75 |
| Clamp Band Width | .75 |
| Clamp Band Width | 19.1 |
| Contents | 1 Turbocharger Hose, 2 T-Bolt Clamps |
| End 1 Inside Diameter | 2.5 |
| End 1 Inside Diameter | 64 |
| End 2 Inside Diameter | 2.5 |
| End 2 Inside Diameter | 64 |
| Inside Diameter 1 (in) | 2.5 |
| Inside Diameter 1 (mm) | 64 |
| Inside Diameter 2 (in) | 2.5 |
| Inside Diameter 2 (mm) | 64 |
| Maximum Clamping Length | 2.9375 |
| Maximum Clamping Length | 74.6 |
| Minimum Clamping Length | 2.625 |
| Minimum Clamping Length | 66.7 |
| Number of Rings | 0 |
| Nut Type | .4375 in. Hex-Head |
| OE Comparison Rating | OE Improved |
| Ring Quantity | 0 |
| Product line | Turbocharger Hose Kits (Molded) |
| Fits | Ford · 9 vehicles |
OE improved. A molded turbocharger hose kit built as a superior alternative to OEM replacement hoses.
Complete hose system. Replaces the turbocharger hose system in one kit for a simpler repair.
T-bolt clamps included. Comes with two clamps for a secure, reliable connection.
Cross-references Gates 26279, 4C2Z 6C640 EA and 4C2Z6C640AA for the same application. See all 7.
Turbocharger Hose Kit for Ford E-350
Gates Turbocharger Hose Kit 26279 is a molded replacement for the hot-side pipe to intercooler connection on select Ford E-350 applications. It is built for direct service of the turbocharger hose system and uses OE Improved construction to address common replacement needs with a more durable fit.
- Molded turbocharger hose kit for hot-side pipe to intercooler routing
- 2.5 in. inside diameter at both ends for matched connection sizing
- 11.75 in. centerline length for the specified Ford turbo hose layout
- Includes hose and two T-bolt clamps
- Clamp range: 2.625 in. to 2.9375 in.
- Clamp band width: 0.75 in.
- Recommended clamp torque: 75 in/lbs
- OE Improved comparison rating
Product Details
This Gates molded turbocharger hose kit is engineered as a one-stop replacement when the turbocharger hose system needs to be serviced as a complete assembly. Part number 26279 is sized with 2.5-inch ends, a 298 mm centerline length, and clamp hardware dimensions that match the listed application. Gates 26279 is a practical service part for Ford E-350 Super Duty and Ford E-350 Club Wagon models where the hot-side pipe to intercooler hose requires replacement.
Gates’ Turbocharger Hose Kits (Molded) line focuses on replacing the full hose section rather than addressing a single weak point. That approach helps restore the turbo hose connection with a molded shape and application-specific dimensions for consistent routing and sealing.
Common Repair Uses
- Replacing a cracked or split turbocharger hose on the hot side
- Correcting boost loss caused by a leaking pipe-to-intercooler connection
- Servicing a hose with heat-related hardening or deterioration
- Addressing clamp sealing issues at the turbocharger hose joint
- Restoring proper fit on Ford E-350 Super Duty and Ford E-350 Club Wagon turbo plumbing
Installation Notes
Verify the hose routing, end diameters, and centerline length before installation. The clamps are specified for a 2.625 in. to 2.9375 in. clamping range and should be tightened to the listed 75 in/lbs recommendation. Confirm the vehicle is one of the listed applications: Fits 2004-2010 Ford E-350 Super Duty, Pipe to Intercooler (Hot Side), and Fits 2004-2005 Ford E-350 Club Wagon, Pipe to Intercooler (Hot Side).
Quality Assurance
Gates positions this Turbocharger Hose Kit as an OE Improved replacement built from the company’s long-running focus on hose system innovation and service durability. This part cross-references Ford numbers 4C2Z 6C640 EA and 6C2Z 6C640 EA for the same application.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2010 | Ford | E-350 Super Duty | 6.0L | V8 | DIESEL | Pipe to Intercooler (Hot Side) | Turbocharger Hose Kits (Molded) |
| 2009 | Ford | E-350 Super Duty | 6.0L | V8 | DIESEL | Pipe to Intercooler (Hot Side) | Turbocharger Hose Kits (Molded) |
| 2008 | Ford | E-350 Super Duty | 6.0L | V8 | DIESEL | Pipe to Intercooler (Hot Side) | Turbocharger Hose Kits (Molded) |
| 2007 | Ford | E-350 Super Duty | 6.0L | V8 | DIESEL | Pipe to Intercooler (Hot Side) | Turbocharger Hose Kits (Molded) |
| 2006 | Ford | E-350 Super Duty | 6.0L | V8 | DIESEL | Pipe to Intercooler (Hot Side) | Turbocharger Hose Kits (Molded) |
| 2005 | Ford | E-350 Club Wagon | 6.0L | V8 | DIESEL | Pipe to Intercooler (Hot Side) | Turbocharger Hose Kits (Molded) |
| 2005 | Ford | E-350 Super Duty | 6.0L | V8 | DIESEL | Pipe to Intercooler (Hot Side) | Turbocharger Hose Kits (Molded) |
| 2004 | Ford | E-350 Club Wagon | 6.0L | V8 | DIESEL | Pipe to Intercooler (Hot Side) | Turbocharger Hose Kits (Molded) |
| 2004 | Ford | E-350 Super Duty | 6.0L | V8 | DIESEL | Pipe to Intercooler (Hot Side) | Turbocharger Hose Kits (Molded) |
| No rows match your filter. | |||||||