/live/media/ZO/ZO_28R4313_Fro.jpg)
Gates 28R4313 Automatic Continuously Variable Transmission (CVT) Belt - Drive Belt
| Brand | Gates 28R4313 |
|---|---|
| Position | Drive Belt |
| Top Width | 1.277 |
| Top Width | 32 |
| Construction | Double notched |
| Color | Black |
| Thickness | .627 |
| Thickness | 15.9 |
| Cord Material | Aramid |
| Cross Section Designation | Rvs-r |
| Outside Circumference | 1124 |
| Outside Circumference | 44.25 |
| Type | Power sport specialty high performance cvt belt |
| Belt Material | Epdm |
| Angle | 28 |
| 9829 | 1.193 |
| 9829 | 30.3 |
| 9830 | 1095 |
| 9830 | 43.126 |
| 9837 | Yes |
| Angle | 28 |
| Belt Material | Epdm |
| Color | Black |
| Construction | Double notched |
| Cord Material | Aramid |
| Fabric Bottom | Yes |
| Notched | Yes |
| OE Comparison Rating | Oe improved |
| Outside Circumference (in) | 44.25 |
| Outside Circumference (mm) | 1124 |
| Pitch Length (in) | 43.126 |
| Pitch Length (mm) | 1095 |
| Fits | — |
OE improved. A direct-fit CVT belt with upgraded performance over standard OE.
Double-notched construction. Helps reduce speed ratio and energy loss in demanding use.
Aramid cord. Adds strength for high-performance CVT operation.
Cross-references Gates 28C4313, Gates 28G4313 and Gates 28R4313 for the same application. See all 7.
Gates G-Force RedLine CVT Belt 28R4313
The Gates G-Force RedLine CVT Belt 28R4313 is a high-performance continuously variable transmission belt built for power sport and specialty applications. It uses an aramid cord, EPDM belt material, and a double-notched construction to support stronger engagement and reduced energy loss in demanding off-road use.
Key Features
- Part number: 28R4313
- Gates G-Force RedLine CVT belt for power sport specialty applications
- Double-notched construction with a fabric bottom and notched profile
- Aramid cord material for added strength and stability
- EPDM belt material with black finish
- RVS-R section, 28-degree angle
- Top width: 1.277 in. (32 mm)
- Thickness: 0.627 in. (15.9 mm)
- Outside circumference: 44.25 in. (1124 mm)
- Pitch width: 1.193 in. (30.3 mm)
- Pitch length: 43.126 in. (1095 mm)
- OE Improved comparison rating
Product Details
Gates G-Force RedLine CVT Belts are part of the Gates G-Force RedLine line, a CVT belt family focused on improved transmission response in high-load environments. This belt is engineered for applications that demand consistent power transfer, including off-road and powersports use where heat, load, and speed changes place extra stress on the belt. If you are sourcing a Gates 28R4313 replacement or comparing 28R4313 CVT belt specifications, the listed dimensions and construction details help confirm the correct match.
This part cross-references Monroe Shocks & Struts (e.g., 59011-0012, XTX2258) for the same application.
Compatible With select powersport and specialty CVT applications where the specified 44.25-inch outside circumference, 32 mm top width, and RVS-R profile are required. For vehicle-specific searches, use terms such as Gates 28R4313 CVT belt, G-Force RedLine belt, and high-performance CVT belt for off-road use. Make/model fitment is not provided in the supplied data, so application confirmation should be based on belt dimensions and OE reference numbers.
Common Issues This Belt Can Address
- Slipping or inconsistent CVT belt engagement
- Loss of acceleration under load
- Reduced top-speed performance from belt wear
- Heat-related belt degradation in demanding use
- Noise or vibration caused by a worn CVT belt
Installation Notes and Tips
Verify the belt’s top width, thickness, outside circumference, pitch width, pitch length, and angle against the original specification before installation. Inspect the CVT system for pulley wear, contamination, and alignment issues, since those conditions can shorten belt life. Follow the vehicle manufacturer’s service procedure for belt break-in, tensioning, and inspection intervals.
Quality Assurance
Gates manufactures this CVT belt with aramid cord reinforcement, EPDM construction, and a double-notched design to support consistent performance in demanding transmission service. The OE Improved rating indicates a design intended to exceed baseline original-equipment comparison standards for the listed application.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||