Gates 349782 Power Steering Return Line End Fitting

Power Steering Return Line End Fitting

The Gates Power Steering End Fitting, part number 349782, is a return line end fitting for steering systems that use a male captive O-ring connection on one end and a beaded tube connection on the other. It is shaped as a 45 degree elbow and measures 6.75 inches in length, with a 9 mm end 1 diameter and a .375 inch end 2 diameter.

Compatible with 2005-2006 Ford Mustang power steering return tube applications from the rack, this Gates 349782 fitting supports a direct-style connection for the return line routing used on those vehicles. The Power Steering End Fitting line from Gates is built for steering hardware applications where accurate tube end geometry and connection style matter.

• Brand: Gates
• Part number: 349782
• Power steering return line end fitting
• End 1: 9 mm male captive O-ring
• End 2: .375 in beaded tube
• 45 degree elbow shape for return line routing
• Length: 6.75 in
• Fits 2005-2006 Ford Mustang, return tube from rack

Detailed Product Overview

This Gates 349782 power steering return line end fitting is specified for steering hardware use where the return tube needs a male captive O-ring seal on one side and a beaded tube connection on the other. The 45 degree elbow design helps match the routing used in the return line from the rack on 2005-2006 Ford Mustang models. If you are replacing a worn or damaged Ford Mustang power steering return tube end, this fitting provides the connection geometry and dimensions needed for the application.

This part cross-references 6R3Z3A713AA and 5-964 for the same application.

Common Issues This Part Can Address

• Leaking power steering return line connection at the rack
• Damaged or corroded tube end fitting
• Improper return line seal at the O-ring connection
• Incorrect tube angle or routing at the steering rack
• Fitment mismatch on 2005-2006 Ford Mustang return tube service

Installation Notes and Tips

Verify the end diameters, connection style, and elbow angle before installation. Match the male captive O-ring end to the rack-side connection and confirm the .375 inch beaded tube end aligns with the return line tubing. Clean the mating surfaces and inspect the return hose or tube for wear, deformation, or contamination before assembly.

Quality Assurance

Gates is a recognized name in automotive fluid transfer and steering-related components. Part number 349782 is listed for the specified Ford Mustang return tube application and should be matched to the vehicle’s steering line configuration before service.