Gates 349960 Power Steering Return Hose

Bulk Power Steering Hose for Custom Return Lines

Gates 349960 is a bulk power steering return hose built for custom-fit cutting and assembly on low-pressure fluid return lines. With a 25-foot length and SAE J189 return hose construction, it gives you the material needed to build the hose length your repair calls for on a wide range of Chrysler, Dodge, and Jeep applications.

This Gates Bulk Power Steering Hose line is made for repair work where the original hose length is no longer available or where a direct replacement needs to be trimmed to match the vehicle. Part number 349960 is commonly searched for Chrysler PT Cruiser, Dodge Dakota, and Jeep Wrangler power steering return hose repairs.

Key Features

• 25-foot bulk hose for custom cutting and assembly
• Inside diameter: 0.34375 in.
• SAE J189 return hose type for low-pressure fluid return lines
• Supports custom-fit routing for power steering return applications
• Gates part number 349960 for catalog and cross-reference lookup

Product Details

Gates 349960 is a bulk power steering return hose intended for low-pressure return-side service, where the hose must be cut to length during installation. The 25-foot length provides flexibility for repairs across multiple vehicle platforms, including Chrysler PT Cruiser, Dodge Ram and Dakota applications, and Jeep TJ and Wrangler models. This hose is also referenced in fitment data for cooler-to-reservoir, gear-to-cooler, gear-to-pump, and other return-line positions depending on the vehicle configuration.

This part cross-references Dorman - HELP 80388 and TYC 30196 for the same application.

Common Problems It Can Address

• Cracked or leaking power steering return hose
• Incorrect hose length after a previous repair
• Fluid seepage at low-pressure return-line routing
• Need for a custom-cut hose on vehicles with varied steering layouts
• Replacement needs on Chrysler, Dodge, and Jeep return-line applications

Installation Notes and Tips

• Measure the original hose path before cutting to length.
• Confirm the hose is being used on a low-pressure return line, not a high-pressure feed line.
• Match the inside diameter to the original routing and fittings used on the vehicle.
• Verify the vehicle’s position and configuration, such as cooler to reservoir or gear to cooler, before assembly.
• Use clean fluid-handling practices to reduce contamination during service.

Quality Assurance

Gates is a recognized name in automotive hose and fluid-transfer components, and this hose is built to SAE J189 return hose specifications for return-line service. Part number 349960 is cataloged for broad vehicle coverage and fitment lookup across 1985-2009 Chrysler, Dodge, and Jeep applications.