OE Quality
60-Day Returns

Gates 352015 Power Steering Pressure Line Hose Assembly - From Pump
Gates 352015 Pressure Line Assembly for Hyundai Tiburon
The Gates 352015 pressure line hose assembly is a direct-fit steering line for the power steering system on select Hyundai Tiburon models. Built to OE performance standards, it matches the original routing and connection style for a clean replacement on the pressure side from the pump.
Key Features
- Brand: Gates Pressure Line Assembly
- Part number: 352015
- Power steering pressure line hose assembly
- Length: 29.5 in.
- End 1 type: Female Inverted Flare, 14 mm
- End 2 type: Banjo, 16 mm
- OE Performance rating
- Switch port included: No
Product Details
Gates 352015 is a pressure line assembly for the steering system, engineered for 2003-2008 Hyundai Tiburon applications at the pump side. This Hyundai Tiburon power steering pressure hose uses a female inverted flare on one end and a banjo fitting on the other, with a 29.5-inch length and OE performance construction for a precise replacement. If you are replacing a leaking or damaged Hyundai Tiburon pressure line, this Gates 352015 hose assembly provides the correct connection style for the listed fitment.
This part cross-references Dorman - HELP 80467 for the same application.
What It Helps Fix
- Power steering fluid leaks at the pressure hose
- Hard or inconsistent steering assist caused by line damage
- Cracked, corroded, or worn hose connections
- Noise from low steering fluid due to a failing pressure line
- Loss of hydraulic pressure in the steering system
Installation Notes and Tips
Fits 2003-2008 Hyundai Tiburon, From Pump. Confirm the end types, 14 mm female inverted flare and 16 mm banjo, before installation. Inspect the mating surfaces, banjo sealing points, and fluid condition during replacement, and bleed the power steering system after installation to remove trapped air.
Quality Assurance
Gates Pressure Line Assembly products are built to OE performance expectations for steering system service. Part number 352015 is specified for the listed Hyundai Tiburon fitment and connection layout.
| Brand | Gates |
| Part Number | 352015 |
| Position | Pressure Line Assembly, From Pump |
| Length | 29.5 |
| End 1 Type | Female inverted flare |
| End 2 Type | Banjo |
| End 1 Diameter (mm) | 14 |
| End 2 Diameter (mm) | 16 |
| OE Comparison Rating | Oe performance |
| Switch Port Included | No |
This part fits 6 vehicles. Search below:
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2008 | Hyundai | Tiburon | 2.7L | V6 | GAS | From Pump | Pressure Line Assembly |
| 2007 | Hyundai | Tiburon | 2.7L | V6 | GAS | From Pump | Pressure Line Assembly |
| 2006 | Hyundai | Tiburon | 2.7L | V6 | GAS | From Pump | Pressure Line Assembly |
| 2005 | Hyundai | Tiburon | 2.7L | V6 | GAS | From Pump | Pressure Line Assembly |
| 2004 | Hyundai | Tiburon | 2.7L | V6 | GAS | From Pump | Pressure Line Assembly |
| 2003 | Hyundai | Tiburon | 2.7L | V6 | GAS | From Pump | Pressure Line Assembly |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.