/live/media/ZP/ZP_352050_Fro.jpg)
Gates 352050 Power Steering Pressure Line Hose Assembly - Tube - To Rack
| Brand | Gates 352050 |
|---|---|
| Position | Tube - To Rack |
| Length | 12.25 |
| End 1 Type | Swivel o-ring type iii |
| End 2 Type | Long swivel o-ring |
| Mounting Brackets Included | No |
| Bracket Bushings Included | No |
| Copper Washers Included | No |
| Crimped Sleeve Material | Anti corrosion steel |
| End 1 Diameter (mm) | 16 |
| End 2 Diameter (in) | .5625 |
| Heat Sleeves Included | No |
| Hose Position | Pump to rack/gear box |
| OE Comparison Rating | Oe performance |
| Rubber Hose Standard | Exceeds sae j188 specifications |
| Rubber Mounts Included | No |
| Steel Tube Material | Zinc single wall steel |
| Switch Port Included | No |
| Product line | Pressure Line Assembly |
| Fits | Ford · 2 vehicles |
OE performance. Built to match original-equipment pressure line expectations.
Corrosion-resistant steel. Crimped sleeve and steel tube help resist wear and rust.
Swivel O-ring ends. Designed for secure, leak-resistant hose connections.
Cross-references Carlson 14258, Dorman - HELP 80248 and MTC/Ronak 1079 for the same application. See all 9.
Gates Pressure Line Assembly for Mustang
The Gates 352050 pressure line assembly is a power steering pressure hose built for the pump-to-rack/gear box route on select Ford applications. It is a direct-fit style replacement for 1997-1998 Ford Mustang models with OE performance expectations and the correct end configurations for the listed application.
Key Features
- Part number: 352050
- Pressure line hose assembly for power steering systems
- Hose position: pump to rack/gear box
- End 1: Swivel O-Ring Type III, 16 mm
- End 2: Long Swivel O-Ring, .5625 in.
- Crimped sleeve material: anti-corrosion steel
- Steel tube material: zinc single wall steel
- Rubber hose standard exceeds SAE J188 specifications
- OE performance rating for factory-style service
- Mounting brackets, bushings, copper washers, heat sleeves, rubber mounts, and switch port not included
Product Details
Gates Pressure Line Assembly 352050 is engineered as a power steering pressure line hose assembly for the pump-to-rack/gear box circuit. It uses a Swivel O-Ring Type III end on one side and a Long Swivel O-Ring end on the other, with corrosion-resistant steel construction at the crimped sleeve and zinc single wall steel tubing for added durability in the steering system. This Gates 352050 hose is listed for 1997-1998 Ford Mustang, Tube - To Rack, Pressure Line Assembly, making it a focused replacement for the specified vehicle fitment.
The Gates Pressure Line Assembly product line is built around OE-style service parts that match the original routing and connection style needed for steering repairs. For shoppers searching for a 1997 Ford Mustang power steering pressure line hose assembly or a 1998 Ford Mustang tube-to-rack steering hose replacement, this part number 352050 provides the listed configuration without unnecessary extras.
This part cross-references Dorman - HELP 80248 and Carlson 14258 for the same application.
Common Repair Uses
- Replacing a leaking power steering pressure hose
- Restoring steering assist after hose seepage or fluid loss
- Addressing cracked, hardened, or corroded hose sections
- Correcting pressure line damage at the pump-to-rack routing
- Servicing a 1997-1998 Ford Mustang steering system with the proper hose layout
Installation Notes
Verify the vehicle year, Ford Mustang application, and tube-to-rack routing before installation. Confirm the end styles and diameters match the original steering line connections, and inspect mating surfaces for wear, corrosion, or contamination before assembly. Because mounting brackets, bushings, and copper washers are not included, reuse or source any required vehicle-specific hardware separately if your application calls for it.
Quality Assurance
Gates lists this pressure line assembly with an OE performance rating, and the rubber hose standard exceeds SAE J188 specifications. The hose assembly is built with anti-corrosion steel and zinc single wall steel components to support long-term steering system service on the specified Ford Mustang applications.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 1998 | Ford | Mustang | 4.6L | V8 | GAS | Tube - To Rack | Pressure Line Assembly |
| 1997 | Ford | Mustang | 4.6L | V8 | GAS | Tube - To Rack | Pressure Line Assembly |
| No rows match your filter. | |||||||