Gates 360910 Power Steering Pressure Line Hose Assembly

Gates Pressure Line Assembly for Steering

The Gates 360910 pressure line hose assembly is a direct-fit steering hydraulic line for select Chevrolet S10, GMC Sonoma, and Isuzu Hombre applications. Built to OE performance standards, it routes fluid from the pump to the rack or gear box with the correct end sizes and switch port provision for listed vehicles.

Key Features

• Part number 360910 from Gates Pressure Line Assembly
• Pressure line hose assembly for pump-to-rack/gear box routing
• Male O-ring ends with 16 mm and 18 mm diameters
• 38.625 in. overall length for listed steering layouts
• Rubber hose exceeds SAE J188 specifications
• Anti-corrosion steel crimped sleeve and zinc single-wall steel tube
• Switch port included for applicable steering system configurations
• OE performance rating for factory-style service replacement

Product Details

This Gates pressure line assembly is engineered for steering systems that require a durable hydraulic hose between the pump and the rack or gear box. The hose construction uses rubber that exceeds SAE J188 specifications, paired with anti-corrosion steel and zinc-coated steel components to support long-term fluid transfer in demanding underhood conditions. The Gates 360910 is a practical replacement choice for Chevrolet S10, GMC Sonoma, and Isuzu Hombre models listed below.

This part cross-references Dorman - HELP 31017 and Dayco 80053 for the same application.

Vehicle Fitment

• Fits 1994-2003 Chevrolet S10, N/A, W/Switch Port; Pressure Line Assembly
• Fits 1994-2003 GMC Sonoma, N/A, W/Switch Port; Pressure Line Assembly
• Fits 1996-2000 Isuzu Hombre, N/A, W/Switch Port; Pressure Line Assembly

What It Helps Address

• Power steering fluid leaks from a worn or corroded pressure hose
• Loss of steering assist caused by pressure line failure
• Fluid seepage at male O-ring connections
• Noise or erratic steering response related to restricted hydraulic flow
• Replacement needs after tube or hose deterioration on the steering circuit

Installation Notes and Tips

Verify the end sizes, switch port requirement, and hose routing before installation. Confirm the vehicle uses the pump-to-rack/gear box configuration shown in the fitment data, and inspect mating seals and connection surfaces for wear before tightening the line.

Quality Assurance

Gates lists this pressure line assembly with an OE performance rating and hose construction that exceeds SAE J188 specifications. The steel tube and crimped sleeve materials are selected for corrosion resistance and service durability in steering applications.