Gates 365608 Power Steering Return Line Hose Assembly - Cooler To Reservoir

Power Steering Return Line Hose Assembly

The Gates 365608 is a power steering return line hose assembly for the cooler-to-reservoir circuit. Built as a 52-inch I.D. hose assembly with 3/8-inch inside diameter ends, it is specified for Ford truck and Lincoln applications that use a finned cooler.

The Gates Return Line Assembly line focuses on direct-fit steering hose replacements for return-side routing. This Gates 365608 assembly follows the listed hose dimensions and connection style for a straightforward replacement on the correct vehicle applications.

Key Features

• Part number: 365608
• Power steering return line hose assembly
• 52-inch length
• 3/8-inch I.D. hose ends on both sides
• Cooler to reservoir routing
• Specified for vehicles with a finned cooler
• Cross-reference: Dorman - HELP 92223

Vehicle Fitment

• Fits 2004-2010 Ford F-150, Cooler To Reservoir, W/Finned Cooler; Return Line Assembly
• Fits 2004-2008 Ford F-250, Cooler To Reservoir, W/Finned Cooler; Return Line Assembly
• Fits 2004-2008 Ford F-350, Cooler To Reservoir, W/Finned Cooler; Return Line Assembly
• Fits 2006-2008 Lincoln Mark LT, Cooler To Reservoir, W/Finned Cooler; Return Line Assembly

Detailed Description

This power steering return line hose assembly is built for the return side of the steering system, carrying fluid from the cooler back to the reservoir. The 52-inch hose length and 0.375-inch I.D. hose ends match the listed application requirements for Ford F-150, Ford F-250, Ford F-350, and Lincoln Mark LT models equipped with a finned cooler. Use Gates 365608 when replacing a worn or leaking return line in the cooler-to-reservoir path.

Common Problems It Can Address

• Power steering fluid seepage at the return hose
• Cracked or hardened hose material
• Restricted fluid return from the cooler circuit
• Loss of steering assist caused by a leaking return line
• Noise or contamination related to deteriorated hose routing

Installation Notes and Tips

Verify the vehicle uses the cooler-to-reservoir return line configuration and a finned cooler before ordering. Match the 52-inch length and 3/8-inch hose diameter to the original routing, and inspect the cooler, reservoir, and adjoining connections for wear before installation. Confirm the hose path is routed without kinks or contact points after replacement.

Quality Assurance

Gates is a recognized supplier of steering hose assemblies and related fluid transfer components. This part cross-references Monroe Shocks & Struts 37298 for the same application.