/live/media/ZO/ZO_39054_Fro.jpg)
Gates 39054 Accessory Drive Belt Tensioner Assembly
| Brand | Gates 39054 |
|---|---|
| Bearing Bore Inside Diameter | .67 |
| Bearing Bore Inside Diameter | 17 |
| Bearing Bore Inside Diameter 1 (in) | .67 |
| Bearing Bore Inside Diameter 1 (mm) | 17 |
| Belt Type | V-Ribbed |
| Belt Type | V-Ribbed |
| Contact Surface | Smooth/Backside |
| Contents | Tensioner Assy. |
| Material | Steel |
| Mounting Hole Quantity | 2 |
| OE Comparison Rating | OE Exact |
| Outside Diameter | 2.76 |
| Outside Diameter | 70 |
| Outside Diameter (in) | 2.76 |
| Outside Diameter (mm) | 70 |
| Pulley 1 Flanged | No |
| Pulley 1 Flanged | No |
| Pulley Quantity | 1 |
| Width | 1.2 |
| Width | 31 |
| Width (in) | 1.2 |
| Width (mm) | 30.6 |
| Product line | DriveAlign Premium OE Automatic Belt Tensioner |
| Fits | Honda · 2 vehicles |
OE exact replacement. Built to OE fit, form, and function with rigid tolerances.
Steel construction. Durable tensioner assembly with a smooth backside contact surface.
Automatic belt tensioner. Keeps the accessory drive belt properly tensioned.
Cross-references Dayco 89600, Febi-Bilstein 39054 and Litens 999182A for the same application. See all 9.
OE Automatic Belt Tensioner for Civic
The Gates DriveAlign Premium OE Automatic Belt Tensioner is built for precise accessory drive belt control on the 2006 Honda Civic. This OE Exact replacement is engineered to match original fit, form, and function for dependable belt tension management in the accessory drive belt system.
Gates DriveAlign Premium OE Automatic Belt Tensioners are part of a product line focused on OE-level system design and manufacturing consistency. For this Gates 39054 tensioner, rigid tolerances and specification control help deliver the correct mounting and pulley geometry for the application.
- OE Exact comparison rating for direct replacement fit
- Steel tensioner assembly for durable construction
- V-ribbed belt application with smooth/backside contact surface
- Single pulley design with non-flanged pulley
- 2 mounting holes for secure installation
- Outside diameter: 70 mm (2.76 in)
- Width: 30.6 mm (1.2 in)
- Bearing bore inside diameter: 17 mm (0.67 in)
Detailed Product Overview
This Gates 39054 accessory drive belt tensioner assembly is made for the 2006 Honda Civic and is cross-referenced to Dayco 89600. It is also referenced by OE-style numbers including 31170RNAA01 and 999182A for the same application. The steel housing, smooth pulley contact surface, and OE Exact rating support proper belt tracking and consistent tension in the accessory drive belt system.
Common Problems This Part Addresses
- Belt squeal caused by weak or inconsistent tension
- Accessory belt flutter or vibration
- Uneven belt wear from a worn pulley or bearing
- Loss of belt tension after the original tensioner ages
- Drive belt noise during engine operation
Installation Notes and Tips
Verify belt routing and inspect the accessory drive belt, idler components, and pulley surfaces before installation. Confirm the mounting points and pulley alignment match the original setup on the 2006 Honda Civic. Use the vehicle’s service information for torque specifications and final inspection after installation.
Quality Assurance
Gates manufactures DriveAlign tensioners to rigid tolerances and OE specifications to support correct fit, form, and function. The Gates 39054 is built as an OE Exact replacement for the listed application.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2006 | Honda | Civic | 1.8L | L4 | CNG | N/A | DriveAlign Premium OE Automatic Belt Tensioner |
| 2006 | Honda | Civic | 1.8L | L4 | GAS | N/A | DriveAlign Premium OE Automatic Belt Tensioner |
| No rows match your filter. | |||||||