/live/media/ZO/ZO_48R4553_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Gates 48R4553 Automatic Continuously Variable Transmission (CVT) Belt - Drive Belt
| Brand | Gates 48R4553 |
|---|---|
| Position | Drive Belt |
| Top Width | 1.469 |
| Top Width | 37 |
| Construction | Double notched |
| Color | Black |
| Thickness | .627 |
| Thickness | 15.9 |
| Cord Material | Aramid |
| Cross Section Designation | Rvs-r |
| Outside Circumference | 1187 |
| Outside Circumference | 46.75 |
| Type | Power sport specialty high performance cvt belt |
| Belt Material | Epdm |
| Angle | 26 |
| 9829 | 1.398 |
| 9829 | 35.51 |
| 9830 | 1156 |
| 9830 | 45.53 |
| 9837 | Yes |
| Angle | 26 |
| Belt Material | Epdm |
| Color | Black |
| Construction | Double notched |
| Cord Material | Aramid |
| Fabric Bottom | Yes |
| Notched | Yes |
| OE Comparison Rating | Oe improved |
| Outside Circumference (in) | 46.75 |
| Outside Circumference (mm) | 1187 |
| Pitch Length (in) | 45.53 |
| Pitch Length (mm) | 1156 |
| Fits | — |
OE improved rating. Built as a direct-fit CVT belt with upgraded performance.
Double-notched construction. Helps reduce speed ratio and energy loss under hard use.
Aramid cord reinforcement. Adds strength for demanding high-performance operation.
Cross-references Dayco 71260, Gates 48C4553 and Gates 48G4553 for the same application. See all 10.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Gates G-Force RedLine CVT Belt Overview
The Gates G-Force RedLine CVT Belt is a high-performance automatic continuously variable transmission belt built for power sport and specialty applications. Part number 48R4553 uses a double-notched construction, aramid cord reinforcement, and EPDM belt material to support consistent operation in demanding off-road conditions.
Gates G-Force RedLine CVT Belts are part of a performance-focused line developed for improved acceleration, higher top speed potential, and reduced speed-ratio and energy loss under load. If you are searching for a Gates CVT belt for a Honda or other powersports application, 48R4553 is built around precise belt dimensions and OE-improved construction.
Key Features
- Part number: 48R4553
- Power Sport Specialty High Performance CVT Belt
- Double-notched construction for flexibility and heat management
- Aramid cord material for added strength
- EPDM belt material with black finish
- Fabric bottom and notched design
- OE Improved comparison rating
- Top width: 1.469 in. (37 mm)
- Thickness: .627 in. (15.9 mm)
- Outside circumference: 46.75 in. (1187 mm)
- Pitch length: 45.53 in. (1156 mm)
- Pitch width: 1.398 in. (35.51 mm)
- Cross section: RVS-R, 26-degree angle
Product Details
Built for automatic CVT systems, this Gates belt is engineered to maintain stable belt engagement and efficient power transfer in high-load environments. The RedLine CVT belt line focuses on reducing energy loss while supporting stronger acceleration response and higher operating speed potential. For buyers comparing Gates 48R4553 against OE-style replacements, the listed dimensions and reinforced construction help ensure the correct match for the intended CVT setup.
This part cross-references Dayco 71260 for the same application.
Common Symptoms This Belt Can Address
- Slipping or inconsistent CVT engagement
- Loss of acceleration response under load
- Reduced top-speed performance from belt wear
- Excessive belt flex or heat-related degradation
- Noise or vibration from a worn CVT drive belt
Installation Notes
Verify belt dimensions, cross section, and CVT system requirements before installation. Inspect pulleys, clutch surfaces, and belt alignment at the same time, since worn components can shorten belt life. For fitment-based searches, confirm the application against the vehicle’s CVT specification before ordering 48R4553.
Compatible With select powersport and specialty CVT applications; fitment data was not provided for specific year/make/model listings. If you are sourcing a Gates CVT belt for Honda model searches or other make/model keywords, match the belt dimensions and section designation to the original specification.
Quality Assurance
Gates positions the G-Force RedLine line as an OE-improved CVT belt solution for demanding use. The aramid-reinforced, EPDM-based construction is designed to support durability and consistent performance in severe off-road environments.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||