/live/media/ZO/ZO_5732_Fro.jpg)
OE Quality
60-Day Returns
Gates 5732 Accessory Drive Belt - Water Pump and Alternator
Accessory Drive Belt for Subaru Applications
Gates Special Belt 5732 is an accessory drive belt for select Subaru water pump and alternator drives. It uses a laminated raw edge V-belt construction with EPDM belt material and polyester cord for stable operation in specialized applications. This part number is listed for 1981-1982 and 1985-1987 Subaru Standard models.
Key Features
- Gates Special Belt line for rare and specialized applications
- Laminated raw edge V-belt construction
- EPDM belt material for durability in accessory drive service
- Polyester cord material for strength and dimensional stability
- HC38 section designation
- 36-degree belt angle
- Effective length: 35.4 in. (899 mm)
- Outside circumference: 35.75 in. (910 mm)
- Top width: 0.38 in. (10 mm)
Product Details
Gates 5732 is built as a laminated raw edge V-belt with a 36-degree angle and HC38 cross section. The EPDM construction is suited to accessory drive service, while the polyester cord helps maintain belt shape and tension consistency. Gates Special Belt coverage is aimed at uncommon and specialized fitments, making this part number a practical choice when servicing select Subaru Standard models with water pump and alternator drive routing. This part number 5732 also cross-references DENSO Auto Parts 5732 for the same application.
What This Belt Helps Address
- Squealing or slipping accessory drive belt noise
- Loss of drive to the water pump and alternator
- Cracking, glazing, or wear on an aging belt
- Incorrect belt length for specialized Subaru routing
- Service replacement for a worn Subaru accessory drive belt
Installation Notes and Tips
Verify belt routing against the vehicle’s accessory drive layout before installation. Confirm the effective length, top width, and section designation match the removed belt or service specification. After installation, check belt tension and recheck alignment after initial run-in. Compatible With 1981-1982 Subaru Standard, water pump and alternator; Fits 1985-1987 Subaru Standard, water pump and alternator.
Quality Assurance
Gates is known for coverage of rare and specialized applications, and this belt is built to meet the demands of select Subaru accessory drive systems. Part number 5732 is specified for confirmed fitment applications listed above.
| Brand | Gates |
|---|---|
| Part Number | 5732 |
| Position | Special Belt, Water Pump and Alternator |
| Top Width | .38 |
| Top Width | 10 |
| Cord Material | Polyester |
| Cross Section Designation | Hc38 |
| Effective Length | 35.4 |
| Effective Length | 899 |
| Outside Circumference | 35.75 |
| Outside Circumference | 910 |
| Type | Laminated raw edge v-belt |
| Belt Material | Epdm |
| Angle | 36 |
| 9837 | No |
| Angle | 36 |
| Application Type | Passenger cars & light trucks |
| Belt Material | Epdm |
| Cord Material | Polyester |
| Effective Length (in) | 35.4 |
| Effective Length (mm) | 899 |
| Notched | No |
| Section | Hc38 |
| Type | Laminated raw edge v-belt |
This part fits 6 vehicles. Search below:
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 1987 | Subaru | Standard | 1.6L | H4 | GAS | Water Pump and Alternator | Special Belt |
| 1987 | Subaru | Standard | 1.8L | H4 | GAS | Water Pump and Alternator | Special Belt |
| 1986 | Subaru | Standard | 1.6L | H4 | GAS | Water Pump and Alternator | Special Belt |
| 1985 | Subaru | Standard | 1.6L | H4 | GAS | Water Pump and Alternator | Special Belt |
| 1982 | Subaru | Standard | 1.8L | H4 | GAS | Water Pump and Alternator | Special Belt |
| 1981 | Subaru | Standard | 1.8L | H4 | GAS | Water Pump and Alternator | Special Belt |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.