/live/media/ZO/ZO_9710_Fro.jpg)
Gates 9710 Accessory Drive Belt
| Brand | Gates 9710 |
|---|---|
| Position | Fan and Alternator, Fan and Air Conditioning, Fan and Hydraulic Pump, Air Conditioning, Alternator, Air Brake Compressor, Fan and Vacuum Pump, Alternator and Air Conditioning, and Fan |
| Top Width | .47 |
| Top Width | 12 |
| Construction | Notched |
| Cord Material | Polyester |
| Cross Section Designation | Hc50 |
| Strand Quantity | 1 |
| Effective Length | 1803 |
| Effective Length | 71 |
| Outside Circumference | 1813 |
| Outside Circumference | 1818 |
| Outside Circumference | 71.38 |
| Outside Circumference | 71.59 |
| Type | High capacity v-belt (standard) |
| Belt Material | Epdm |
| Angle | 36 |
| 9837 | Yes |
| Angle | 36 |
| Belt Material | Epdm |
| Construction | Notched |
| Cord Material | Polyester |
| Notched | Yes |
| Number of Strands | 1 |
| Section | Hc50 |
| Type | High capacity v-belt (standard) |
| Fits | — |
High capacity V-belt. Built for demanding engine drives and steady accessory performance.
Notched construction. Helps the belt tighten as it heats to reduce slippage and noise.
EPDM with polyester cords. Durable materials for long-lasting belt service.
Cross-references AMS Automotive 4715, Anchor 2360 and Anchor 9710 for the same application. See all 176.
Gates 9710 Accessory Drive Belt Overview
The Gates 9710 is a High Capacity V-Belt (Standard) built for demanding engine drive systems. Its notched construction helps the belt conform as engine temperatures rise, supporting steadier operation and reduced belt noise.
For drivers searching for a durable replacement accessory drive belt for Ford, Chevrolet, or Dodge applications, this Gates 9710 belt is built around EPDM material and polyester cord reinforcement for consistent performance in accessory drive belt system service.
Key Features
- Gates High Capacity V-Belt (Standard) for accessory drive belt system applications
- Notched construction helps the belt flex and track under heat
- EPDM belt material for long service life in engine bay conditions
- Polyester cord material for strength and dimensional stability
- HC50 section with 36-degree angle
- Top width: 12 mm (.47 in)
- Effective length: 1803 mm (71 in)
- Outside circumference: 1813-1818 mm (71.38-71.59 in)
Product Details
The Gates 9710 is part of the Gates High Capacity V-Belt (Standard) line, a product line focused on replacement belts for engine drives that see continuous heat and load. The variable notched design is used to help the belt tighten on the drive as temperatures increase, which supports better grip and quieter operation. If you are replacing a worn accessory drive belt on a Ford F-150, Chevrolet C/K truck, or Dodge Ram application, this belt provides the dimensional and material specifications needed for a direct-style replacement.
This part cross-references Anchor 2360 and Gates 3700 for the same application.
Common Problems This Belt Can Address
- Squealing from a worn or glazed accessory drive belt
- Belt slippage under heat and engine load
- Cracking, fraying, or hardening of an aging V-belt
- Reduced accessory drive performance from poor belt grip
- Noise caused by a belt that no longer tracks smoothly
Installation Notes and Tips
Verify belt length, top width, and section before installation. Inspect pulleys, tensioners, and accessory drive components for wear or misalignment before installing the new belt. Confirm the routing matches the vehicle service information for the specific Ford, Chevrolet, or Dodge application.
For best results, compare the old belt’s dimensions and profile to the Gates 9710 before final installation. Proper pulley condition and correct tension help the belt perform as intended in accessory drive service.
Quality Assurance
Gates is a recognized name in automotive belt systems, and this belt is built with EPDM construction and polyester reinforcement for durable replacement service in demanding engine drives.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||