GBR 8-016 Fuel Injector Seal Kit

Fuel Injector Seal Kit for Honda and Acura

GBR Fuel Injector Seal Kit 8-016 is a service kit for resealing a fuel injector after removal. It includes the o-rings and seals needed to restore the injector seal, with hard-to-find components that were previously dealer-only in many applications. This kit is used on a wide range of Honda, Acura, and Isuzu models, including Honda Civic, Accord, and Acura Integra applications.

Key Features

• Fuel injector seal kit for one injector
• Includes the necessary o-rings and seals for resealing
• Includes hard-to-find or previously dealer-only components
• Direct service part for Honda, Acura, and Isuzu fuel injector maintenance
• Part number: 8-016

Detailed Description

GBR 8-016 is a Fuel Injector Seal Kit built for injector reseal service after removal. Proper resealing is recommended whenever the injector is taken out, and this kit provides the seals and o-rings needed to complete that service on supported Honda and Acura fuel systems. It is listed for applications such as 1985-2005 Honda Civic, 1985-2002 Honda Accord, 1986-2001 Acura Integra, and 1991-2005 Acura NSX, along with other covered models including Honda S2000, CR-V, Odyssey, Prelude, and Acura RL, CL, TL, EL, plus Isuzu Oasis. Part number 8-016 is a practical choice for injector service on these vehicles.

What It Helps Address

• Fuel seepage at the injector seal after injector removal
• Vacuum leaks caused by worn injector o-rings
• Hard starting or rough idle related to injector sealing issues
• Fuel odor from deteriorated injector seals
• Service delays when dealer-only seal components are needed

Installation Notes and Tips

Install during injector removal service and follow the vehicle-specific procedure for the application. Refer to Technical Bulletin TB-0119-EFS for the listed fitments. Clean the injector and mating surfaces before resealing, and verify that the seals are seated correctly before returning the vehicle to service. Compatible with 1991-2005 Acura NSX, 1985-2005 Honda Civic, 2000-2005 Honda S2000, and other listed Honda and Acura models.

Quality Assurance

GBR supplies service kits with the seals and o-rings required for injector reseal work, including components that are difficult to source separately. This part number is 8-016.