GBR 8-079 Fuel Injector Seal Kit

Fuel Injector Seal Kit for GDI Service

GBR Fuel Injector Seal Kit 8-079 provides the o-rings and seals needed to reseal a fuel injector after removal. It is a direct service solution for gasoline direct injection applications where injector sealing should be renewed during maintenance.

Compatible With Buick Enclave, Chevrolet Traverse, GMC Acadia, Hyundai Sonata, Kia Sorento, and related applications listed below, this kit supports proper injector resealing for service work on GM and Hyundai/Kia engines. Part number 8-079 is also referenced for hard-to-find components that were previously dealer-only in some applications.

Key Features

• Fuel injector seal kit for injector resealing service
• Includes the necessary o-rings and seals for proper injector service
• Application-specific fitment for select Buick, Chevrolet, GMC, Hyundai, Kia, Cadillac, and Saturn vehicles
• Suitable for gasoline direct injection injector service procedures
• GBR part number 8-079

Detailed Description

GBR 8-079 is a Fuel Injector Seal Kit built for injector reseal service on select GM and Hyundai/Kia vehicles. When an injector is removed, replacing the sealing components is a standard service step to restore the injector seal interface and maintain proper fuel system sealing. This kit is listed for applications including 2012-2017 Chevrolet Traverse, 2012-2016 GMC Acadia, 2015-2017 Hyundai Sonata, and 2016-2018 Kia Sorento, along with additional Buick, Cadillac, GMC, and Saturn models.

The GBR Fuel Injector Seal Kit line focuses on the seals and o-rings needed for injector service, including components that can be difficult to source through dealer channels. Part number 8-079 is a practical choice for technicians servicing direct-injection fuel systems on vehicles such as the Buick Enclave and GMC Acadia.

What It Helps Address

• Fuel seepage at the injector seal area after injector removal
• Air leaks or sealing issues at the injector interface
• Service delays caused by missing injector seal components
• Need for resealing during direct-injection injector maintenance
• Replacement of worn or damaged injector o-rings and seals

Installation Notes and Tips

Install during injector removal service and follow the vehicle service procedure for the specific engine. Clean the injector bore and sealing surfaces before reassembly, and verify that the correct seals are used for the application. For some GM applications, refer to Technical Bulletin TB-0119-EFS during service.

Quality Assurance

GBR supplies injector seal kits with the sealing components required for proper injector reseal service, including application-specific parts for select vehicles. Part number 8-079 is listed for multiple direct-injection applications to support accurate service replacement.