GKN Loebro 300419 CV Joint Boot Kit - Front Inner

OE-Quality CV Boot Kit for Saab 9000

GKN Loebro 300419 is a premium OE-quality CV joint boot kit built for the front inner position on select Saab 9000 models. It is designed for 1995-1997 Saab 9000 applications and uses a solid rubber boot to help protect the CV joint from contamination and grease loss.

Key Features

• Fits 1995-1997 Saab 9000, front inner
• GKN Loebro part number 300419
• Rubber boot construction with black finish
• Solid boot design, non-vented
• Joint end inside diameter: 3.307 in.
• Shaft end inside diameter: 0.826 in.
• Single-rib design for the specified joint application

Detailed Description

This CV joint boot kit is made for exact-fit replacement on the front inner driveline position of the Saab 9000. GKN Loebro focuses on matching the boot material and dimensions to the joint, which matters because torn, slipped, or porous boots are common causes of CV joint failure. Part number 300419 is a direct-fit service solution for the 1995-1997 Saab 9000 and is built with rubber rather than TPE.

This part cross-references Monroe Shocks & Struts (e.g., 89 93 628, 8961864) for the same application.

Common Problems This Part Addresses

• Grease leakage from a damaged CV boot
• Dirt and moisture entering the CV joint
• Boot cracking from age and road exposure
• Boot slippage at the shaft or joint end
• Noise or vibration caused by CV joint contamination

Installation Notes and Tips

Verify the joint end and shaft end diameters before installation to confirm the correct fit for your Saab 9000 front inner axle assembly. Inspect the CV joint for wear or contamination before replacing the boot, and clean the joint thoroughly if grease loss has occurred. Use the correct boot material for the original driveshaft design; if the vehicle was originally equipped with a TPE boot, match that material type rather than substituting rubber.

Quality Assurance

GKN Loebro is part of GKN Automotive, a global driveline systems supplier known for OE-quality replacement components. This boot kit is engineered to support professional repair standards with the fit and material selection needed for the specified application.