/live/media/GK/GK_304952_Fro.jpg)
OE Quality
60-Day Returns
GKN Loebro 304952 Drive Shaft CV Joint Kit - Front Right Outer
OE-Style CV Joint Kit for Audi A6
Restore smooth driveline operation with this GKN Loebro drive shaft CV joint kit, part number 304952. It is a standard replacement solution built with OE technology for the front right outer position on 2006-2011 Audi A6 models.
GKN Automotive supplies driveline solutions for combustion, hybrid, electric, front-wheel, rear-wheel, and all-wheel drive vehicles, and this kit reflects that OE-focused engineering approach. The 304952 kit is built for a professional repair on the Audi A6 front right outer CV joint application.
Key Features
- Brand: GKN Loebro
- Part number: 304952
- Drive shaft CV joint kit for standard replacement service
- Fits 2006-2011 Audi A6, front right outer
- 38 shaft spline quantity
- CV joint dimensions include 100 mm joint diameter and 97 mm length
- Boot material: TPE
- Includes joint, boot, circlip, tightening straps, bolts, nuts, spacers, grease, and related repair components as specified by the manufacturer
Detailed Description
This GKN Loebro 304952 CV joint kit is engineered for the front right outer axle position on the Audi A6. It is a direct-fit, OE-style service part for 2006-2011 Audi A6 vehicles, making it a practical choice when replacing a worn or noisy outer CV joint. The kit is built around the precise dimensions and spline count needed for this application, including a 38-spline shaft interface and a 100 mm joint diameter.
GKN Loebro uses OE technology and application-specific tuning to match the demands of passenger vehicles, including luxury cars and light trucks. This part cross-references Four Seasons 24681 for the same application. Part number 304952 is also referenced in aftermarket catalogs under OE-style interchange numbers for this Audi A6 driveline service.
What It Is Used For
- Clicking or popping noises during turns from a worn outer CV joint
- Vibration or shudder from driveline wear at the front right axle
- Grease leakage from a damaged CV boot
- Restoring smooth power transfer in the front right outer driveline position
- Replacing a service-worn CV joint on 2006-2011 Audi A6 models
Installation Notes and Tips
Confirm axle spline count, joint diameter, and thread specifications before installation. Clean the mating surfaces thoroughly and inspect the axle shaft, hub area, and surrounding components for wear before assembling the new joint. Use the correct torque values and follow the vehicle service procedure for the Audi A6 front right outer CV joint replacement.
Quality Assurance
GKN Automotive is a global driveline supplier with OE-focused engineering used by major vehicle manufacturers. The 304952 kit is built as a standard replacement part for professional repair work and is specified with the components needed for a complete CV joint service as listed by the manufacturer.
| Brand | GKN Loebro |
|---|---|
| Part Number | 304952 |
| Length | 3.826 |
| Grade Type | Standard replacement |
| Shaft Spline Quantity | 38 |
| CV Joint End 1 Outside Diameter | 3.937 |
| CV Joint End 2 Outside Diameter | 2.342 |
| CV Joint Housing Material | Cv joint; a: 38; f: 27; o [mm]: 60; machined: with groove in inte |
| CV Joint Housing Material | Cv joint;a:38t;f:27t;o:Ø59,50mm;joint:Ø100mm;l:97,2mm;m16x1.5;w |
| Special Information | Cv joint end 2 outside dia.: cv joint; a: 38; f: 27; o [mm]: 60; |
This part fits 6 vehicles. Search below:
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2011 | Audi | A6 | 3.2L | V6 | Front Right Outer | |
| 2010 | Audi | A6 | 3.2L | V6 | Front Right Outer | |
| 2009 | Audi | A6 | 3.2L | V6 | Front Right Outer | |
| 2008 | Audi | A6 | 3.2L | V6 | Front Right Outer | |
| 2007 | Audi | A6 | 3.2L | V6 | Front Right Outer | |
| 2006 | Audi | A6 | 3.2L | V6 | Front Right Outer |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.