/live/media/GK/GK_306419_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
GKN Loebro 306419 CV Axle Assembly - Front or Front Right
| Brand | GKN Loebro 306419 |
|---|---|
| Position | Front and Front Right |
| Bolt Hole Circle Diameter | 74 mm |
| Inner Joint Diameter | 86 mm |
| Length | 715 mm |
| Number of mounting holes | 6 |
| Outer Joint Diameter | 88 mm |
| Outer Joint Spline Count | 28 |
| Fits | Porsche · 3 vehicles |
OE technology. Built with application-specific driveline engineering for precise fit and function.
Exact geometry. 715 mm length with 86 mm inner and 88 mm outer joint diameters.
OE-focused range. From GKN Automotive, a global driveline supplier for passenger vehicles.
Cross-references Gates 36240 and 9P1407271 for the same application. See all 2.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style CV Axle Assembly
The GKN Loebro 306419 is a CV axle assembly built around OE technology and application-specific tuning. It is engineered for precise driveline operation in passenger vehicles where joint geometry, spline count, and overall length must match the original setup.
Compatible with Porsche 911 applications, this axle assembly uses a 715 mm length, 86 mm inner joint diameter, 88 mm outer joint diameter, 28 outer joint splines, and a 74 mm bolt hole circle diameter. The GKN Loebro 306419 is a direct-fit driveline component for front-end service where exact dimensions matter.
Key Features
- CV axle assembly with OE technology from GKN Automotive
- 715 mm overall length for application-specific fitment
- 86 mm inner joint diameter and 88 mm outer joint diameter
- 28-spline outer joint for correct driveline engagement
- 6 mounting holes with a 74 mm bolt hole circle diameter
Detailed Description
GKN Loebro 306419 is part of a driveline range developed for modern passenger vehicles, including performance and luxury applications. The design reflects the dimensional and joint requirements needed for smooth torque transfer and consistent axle operation. For Porsche 911 fitments, the axle is specified by exact length and joint dimensions to match the original driveline layout. If you are replacing a worn CV axle on a Porsche 911, this part number 306419 provides the correct geometry for the listed front applications.
Common Issues This Part Can Address
- Clicking or popping noises during turns from a worn CV joint
- Vibration caused by axle wear or incorrect driveline geometry
- Grease leakage from a damaged axle boot or joint assembly
- Excessive play in the axle shaft or joints
- Driveline noise under acceleration or load changes
Installation Notes and Tips
Verify the vehicle’s front axle configuration, length, and joint dimensions before installation. Confirm the 715 mm specification, spline count, and mounting-hole pattern against the removed part to ensure correct fitment. Professional installation is recommended for driveline service, and the axle should be inspected for related wear in adjacent suspension and hub components.
Quality Assurance
GKN Automotive supplies driveline solutions to a large share of global vehicle manufacturers and produces axle assemblies at high volume for passenger vehicle applications. The 306419 reflects that OE-focused engineering approach for consistent fit and function.
This part cross-references Gates 36240 for the same application.
Compatible With Porsche 911 front and front right applications, 2017-2019.
| Year | Make | Model | Drive Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2019 | Porsche | 911 | AWD | 3.8L | H6 | Front Right | Length 715 mm |
| 2018 | Porsche | 911 | AWD | 3.8L | H6 | Front | Length 715 mm |
| 2017 | Porsche | 911 | — | 3.8L | H6 | Front | Length 715 mm |
| No rows match your filter. | |||||||