/live/media/G6/G6_2200011_Fro.jpg)
OE Quality
60-Day Returns
GMB 220-0011 Universal Joint - Rear Shaft All Joints
Reliable Universal Joint for Toyota Corolla Drive Shaft
The GMB 220-0011 universal joint is designed specifically for Toyota Corolla driveline applications. Engineered to meet OEM standards, this universal joint ensures smooth power transfer and durability in your vehicle's drive shaft system.
- Bearing cap diameter: 0.7900 inches on both axes for precise fitment
- Machined bearing cap finish for enhanced durability
- Pre-greased and greasable design with included grease zerks for easy maintenance
- Rubber seals made from nitrile rubber to protect against contaminants
- Inside snap ring style (ISR) for secure installation
- Universal joint cross constructed from chrome-molybdenum steel for strength
- OEM standard item grade ensuring reliable performance
Durable Construction and Maintenance Features
This GMB universal joint (part number 220-0011) features a machined bearing cap finish that provides a smooth surface for reduced wear. The bearing caps measure 0.7900 inches in diameter on both axes, ensuring a precise fit within the Toyota Corolla drive shaft assembly. The universal joint cross is made from chrome-molybdenum steel, a material known for its toughness and resistance to fatigue. Additionally, the joint is pre-greased and includes grease zerks, allowing for ongoing lubrication and extended service life. The nitrile rubber seals help keep dirt and moisture out, maintaining optimal joint performance.
Compatible Applications and Use Cases
This universal joint is compatible with Toyota Corolla models requiring a 220-0011 part number replacement. It is designed to address common driveline issues such as:
- Excessive vibration or noise from worn universal joints
- Loose or damaged bearing caps causing driveline play
- Seals failing to keep contaminants out, leading to premature wear
- Insufficient lubrication resulting in joint binding or failure
- Corrosion or fatigue in the universal joint cross
Installation Notes and Tips
When installing the GMB 220-0011 universal joint on a Toyota Corolla drive shaft, ensure the inside snap ring style (ISR) is properly seated to secure the joint. Verify that the bearing caps fit snugly with the specified 0.7900 inch diameter. Regular greasing through the included grease zerks is recommended to maintain smooth operation and prevent premature wear. Use appropriate tools to avoid damaging the machined bearing caps or seals during installation.
Quality Assurance and Warranty
The GMB 220-0011 universal joint meets OEM standard item grade requirements, ensuring compatibility and reliability for Toyota Corolla driveline repairs. The part is pre-greased and designed for long-lasting performance under normal operating conditions. Warranty coverage details should be confirmed with the original equipment manufacturer or distributor.
| Brand | GMB |
| Part Number | 220-0011 |
| Bearing Cap Diameter Axis 1 (in) | 0.7900 |
| Bearing Cap Diameter Axis 2 (in) | 0.7900 |
| Bearing Cap Finish | Machined |
| Greasable | Yes |
| Grease Zerks Included | Yes |
| Item Grade | OEM Standard |
| Pre-Greased | Yes |
| Seal Color / Finish | Rubber |
| Seal Material | Nitrile Rubber |
| Snap Ring Type | Inside |
| Universal Joint Cross Material | Chrome-Molybdenum Steel |
| Universal Joint Type | (ISR) Inside Snap Ring Style |
This part fits 30 vehicles. Search below:
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 1979 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap |
| 1979 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap |
| 1978 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap |
| 1978 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap |
| 1977 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap |
| 1977 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap |
| 1976 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap |
| 1976 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap |
| 1975 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap |
| 1975 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap |
| 1974 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 2 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap |
| 1974 | Toyota | Corolla | 1.6L | L4 | Rear Shaft All Joints | Standard Grade; 2 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap |
| 1974 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 3 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap |
| 1974 | Toyota | Corolla | 1.6L | L4 | Rear Shaft All Joints | Standard Grade; 3 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap |
| 1973 | Toyota | Corolla | 1.6L | L4 | Rear Shaft All Joints | Standard Grade; 2 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap |
| 1973 | Toyota | Corolla | 1.6L | L4 | Rear Shaft All Joints | Standard Grade; 3 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap |
| 1973 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 2 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap |
| 1973 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 3 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap |
| 1972 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 3 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap |
| 1972 | Toyota | Corolla | 1.6L | L4 | Rear Shaft All Joints | Standard Grade; 3 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap |
| 1972 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 2 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap |
| 1972 | Toyota | Corolla | 1.6L | L4 | Rear Shaft All Joints | Standard Grade; 2 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap |
| 1971 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 3 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap |
| 1971 | Toyota | Corolla | 1.6L | L4 | Rear Shaft All Joints | Standard Grade; 2 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap |
| 1971 | Toyota | Corolla | 1.6L | L4 | Rear Shaft All Joints | Standard Grade; 3 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap |
| 1971 | Toyota | Corolla | 1.2L | L4 | Rear Shaft All Joints | Standard Grade; 2 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap |
| 1970 | Toyota | Corolla | Rear Shaft All Joints | Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap | ||
| 1970 | Toyota | Corolla | Rear Shaft All Joints | Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap | ||
| 1969 | Toyota | Corolla | Rear Shaft All Joints | Standard grade universal joint with grease fitting installed in bearing cap. | ||
| 1968 | Toyota | Corolla | Rear Shaft All Joints | Standard grade universal joint with grease fitting installed in bearing cap. |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.