Hella 006097001 Engine Oil Pressure Switch

Hella Oil Pressure Switch for BMW

Restore accurate oil pressure signaling with this Hella engine oil pressure switch, part number 006097001. It is a direct-fit, 12V, 1-pin switch with a normally closed contact and the brown OE-style color used on many BMW applications.

Built around the specified M12x1.5 thread and a 0.2 to 0.5 bar switching range, this switch is a practical replacement for BMW engines that rely on precise oil pressure monitoring. Hella 006097001 is used across a wide range of BMW 3 Series, 5 Series, 6 Series, 7 Series, X3, X5, X6, Z3, Z4, and M models.

Key Features

• Brand: Hella
• Part number: 006097001
• Engine oil pressure switch with normally closed contact
• 12V rated voltage and 0.25A current strength
• Switch pressure range: 0.2 to 0.5 bar
• M12x1.5 thread size with 24 mm spanner size
• Brown OE-style housing color
• 1-pin connector design

Detailed Description

This Hella oil pressure switch is engineered for BMW engines that require a brown, 1-pin, normally closed pressure switch with a 0.2 to 0.5 bar operating range. The part number 006097001 appears in fitment for many BMW models, including 328i, 335i, 535i, X3, X5, and M3 applications, making it a strong match for long-tail searches such as BMW engine oil pressure switch 006097001 and Hella oil pressure switch for BMW 535i.

Hella is listed here as the OE source for the application, and this switch follows the specified electrical and mechanical details: 12V operation, M12x1.5 thread, 50 Nm tightening torque, and 10% tolerance. This part cross-references Febi-Bilstein 06033 and Standard Ignition PS-292 for the same application.

What It Helps Address

• Oil pressure warning light staying on or triggering incorrectly
• Intermittent oil pressure signal faults
• Failed pressure switch readings at the instrument cluster
• Replacement needs after sensor or switch wear
• BMW oil pressure switch service on engines using the brown 1-pin design

Installation Notes and Tips

Verify the connector style, thread size, and pressure range before installation. The switch uses an M12x1.5 thread and a 24 mm spanner size, with a tightening torque of 50 Nm. Confirm the vehicle’s original switch color and electrical configuration match the listed specifications before final assembly.

Compatible With BMW applications including 328i, 335i, 535i, X3, X5, X6, Z4, M3, M5, and 650i models across the listed years. For fitment-specific searches, Hella 006097001 is commonly referenced for BMW oil pressure switch replacement on 3 Series, 5 Series, and X Series vehicles.

Quality Assurance

This Hella part is specified as genuine OE from HELLA for the listed applications and is built to the published electrical and pressure-switch requirements for BMW fitment.