/live/media/ES/ES_T4N1742XP_Fro.jpg)
Hotbray T4N1742XP Disc Brake Rotor - Rear
| Brand | Hotbray T4N1742XP |
|---|---|
| Position | Rear |
| Material | Cast iron |
| Construction | Full cast |
| Rust Resistant Coating | Yes |
| Overall Height | 1.653 |
| Overall Height | 42.0 |
| Outside Diameter | 11.810 |
| Outside Diameter | 300.0 |
| Surface Type | Smooth |
| Solid Or Vented Type Rotor | Solid |
| Directional or Non-Directional Brake Surface | Directional |
| Lug Hole Quantity | 5 |
| Fits | Jaguar and Land Rover · 5 vehicles |
Cast iron construction. Full cast rotor design for a direct brake service replacement.
Rust-resistant coating. Helps protect the rotor finish during storage and service.
Smooth braking surface. Supports consistent pad contact during rotor replacement.
Cross-references BD180881E for the same application. See all 1.
Overview
Hotbray T4N1742XP is a rear disc brake rotor built for specific vehicles with 300 mm rear rotors. It uses cast iron construction with a full cast design, a smooth braking surface, and a rust-resistant coating for service-focused replacement needs.
Key Features
- Cast iron rotor with full cast construction
- Solid rotor design with a smooth surface
- Rust-resistant coating helps protect the rotor finish
- Directional brake surface for application-specific fitment
- 5-lug hole pattern
Detailed Description
This Hotbray brake rotor, part number T4N1742XP, is engineered for rear brake service on the Jaguar XE and Land Rover Range Rover Sport when the vehicle uses 300 mm diameter rear rotors. The solid rotor design and cast iron construction provide a straightforward replacement format for vehicles that call for this configuration. The smooth surface and directional braking face support consistent contact characteristics during brake service. If you are replacing a worn rear rotor on a Jaguar XE or Land Rover Range Rover Sport, T4N1742XP matches the listed fitment and rotor size requirements. This part cross-references BD180881E for the same application.
Common Uses
- Replacing a worn or scored rear brake rotor
- Addressing brake pulsation caused by rotor wear
- Restoring braking performance after heat checking or surface damage
- Matching a 300 mm rear rotor specification during brake repair
Installation Notes
Verify rotor diameter, lug pattern, and rear brake application before installation. Confirm the vehicle is equipped with 300 mm diameter rear rotors, as listed in the fitment data. Clean the hub mounting surface and inspect related brake components during service. Part number T4N1742XP should be matched to the exact vehicle application shown in the fitment table.
Quality Assurance
Hotbray T4N1742XP is built with cast iron construction and a rust-resistant coating to support dependable brake service. Confirm fitment against the listed Jaguar XE and Land Rover Range Rover Sport applications before installation.
| Year | Make | Model | Submodel | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2018 | Jaguar | XE | Base | 2.0L | L4 | Rear | Only for cars with 300mm diameter rear rotors |
| 2017 | Jaguar | XE | Base | 2.0L | L4 | Rear | Only for cars with 300mm diameter rear rotors |
| 2017 | Land Rover | Range Rover Sport | SE | 3.0L | V6 | Rear | Only for cars with 300mm diameter rear rotors |
| 2016 | Land Rover | Range Rover Sport | SE | 3.0L | V6 | Rear | Only for cars with 300mm diameter rear rotors |
| 2015 | Land Rover | Range Rover Sport | SE | 3.0L | V6 | Rear | Only for cars with 300mm diameter rear rotors |
| No rows match your filter. | |||||||