/live/media/KY/KY_349092_Fro.jpg)
KYB 349092 Shock Absorber - Rear
| Brand | KYB 150.40439 |
|---|---|
| Banjo Bolt [cntrc] | Yes |
| Bracket Included | Yes |
| Bracket Material | Steel |
| Bracket Quantity | 1 |
| Clip Qty [cntrc] | 1 |
| Clip [cntrc] | Yes |
| Color | Black |
| DOT Approved | Yes |
| End 1 Fitting Material | Metal |
| End 1 Fitting Type | Banjo |
| End 1 Thread Size | 10.0mm |
| End 2 Fitting Material | Metal |
| End 2 Fitting Type | Female |
| End 2 Flare Type | Bubble |
| End 2 Thread Size | M10-1.00 |
| Gasket Or Seal Included | Yes |
| Grommets Included | No |
| Mounting Hardware Included | No |
| Outer Sleeve Material | EPDM Rubber |
| Overall Length | 21.260 |
| Overall Length | 540.00 |
| Shield Included | No |
| Teflon Lined | No |
| Product line | Excel-G |
| Fits | —16 vehicles |
OEA replacement. Restores original performance with OE-quality components and calibration.
Twin-tube design. Nitrogen gas-charged for consistent damping and control.
Triple-lip fluid seal. Helps reduce the chance of oil and gas leakage.
Cross-references Monroe Shocks & Struts 33204, Monroe Shocks & Struts 37317 and Nissan E62101AA0C for the same application. See all 4.
KYB Excel-G Rear Shock for Nissan Murano
The KYB Excel-G 349092 is a rear suspension shock absorber for Nissan Murano models. It is built to restore original ride control, stability, braking response, and lane-change handling without changing the vehicle’s intended suspension behavior.
Made on KYB OE assembly lines, the Excel-G line uses OE-quality components and a nitrogen gas-charged twin-tube design. For drivers searching for a rear shock absorber for a Nissan Murano, KYB 349092 is an OE-style replacement focused on factory-correct performance.
Key Features
- Fits 2022-2024 Nissan Murano, rear
- Fits 2009-2021 Nissan Murano, rear
- OE-style replacement for Asian SUVs and crossovers
- Vehicle-specific damping valves help manage tire contact, steering response, and body movement
- Triple-lip fluid seal helps reduce oil and gas leakage
- Nitrogen gas-charged, twin-tube construction
- Internal rebound spring included
- Strong strut body and bracket design helps maintain alignment under load
Product Details
The KYB Excel-G 349092 is engineered to restore the designed suspension feel of the Nissan Murano rear suspension. It measures 13.68 inches compressed, 17.87 inches extended, and provides 4.19 inches of stroke. Mounting details include an E2 lower mount (12.4 x 45) and an S1 upper mount (12 mm). This part cross-references Monroe Shocks & Struts 33204 and 37317 for the same application.
KYB’s Excel-G product line is built for drivers who want factory-correct ride control rather than a softer or firmer aftermarket feel. For Nissan Murano rear shock replacement, part number 349092 supports consistent damping and predictable handling across daily driving conditions.
What This Shock Absorber Helps Address
- Excessive rear bounce after bumps
- Reduced braking stability from worn suspension damping
- Loose or unsettled rear-end handling during lane changes
- Uneven tire contact caused by weak shock control
- Suspension noise or fluid leakage from a worn rear shock
Installation Notes
Fits 2022-2024 Nissan Murano, rear, recommended OEM replacement; Excel-G. Fits 2009-2021 Nissan Murano, rear; replace the suspension strut and coil spring assembly according to the manufacturer’s instructions; Excel-G. Verify mount style and dimensions before installation, and inspect related suspension components for wear. KYB recommends protecting new struts from dirt, debris, and salt with KYB strut boot SB108.
Quality Assurance
KYB is a major OE supplier to vehicle manufacturers, and the Excel-G line is produced on the same KYB OE assembly lines using OE-quality components. The design is calibrated to restore original performance for Nissan Murano applications, including rear fitments for 2009-2024 models.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2024 | Nissan | Murano | Rear | Recommended OEM Replacement; Excel-G |
| 2023 | Nissan | Murano | Rear | Recommended OEM Replacement; Excel-G |
| 2022 | Nissan | Murano | Rear | Recommended OEM Replacement; Excel-G |
| 2021 | Nissan | Murano | Rear | Replace suspension strut and coil spring assembly according to manufacturer's instructions.; Excel-G |
| 2020 | Nissan | Murano | Rear | Replace suspension strut and coil spring assembly according to manufacturer's instructions.; Excel-G |
| 2019 | Nissan | Murano | Rear | Replace suspension strut and coil spring assembly according to manufacturer's instructions.; Excel-G |
| 2018 | Nissan | Murano | Rear | Replace suspension strut and coil spring assembly according to manufacturer's instructions.; Excel-G |
| 2017 | Nissan | Murano | Rear | Replace suspension strut and coil spring assembly according to manufacturer's instructions.; Excel-G |
| 2016 | Nissan | Murano | Rear | Replace suspension strut and coil spring assembly according to manufacturer's instructions.; Excel-G |
| 2015 | Nissan | Murano | Rear | Replace suspension strut and coil spring assembly according to manufacturer's instructions.; Excel-G |
| 2014 | Nissan | Murano | Rear | Replace suspension strut and coil spring assembly according to manufacturer's instructions.; Excel-G |
| 2013 | Nissan | Murano | Rear | Replace suspension strut and coil spring assembly according to manufacturer's instructions.; Excel-G |
| 2012 | Nissan | Murano | Rear | Replace suspension strut and coil spring assembly according to manufacturer's instructions.; Excel-G |
| 2011 | Nissan | Murano | Rear | Replace suspension strut and coil spring assembly according to manufacturer's instructions.; Excel-G |
| 2010 | Nissan | Murano | Rear | Replace suspension strut and coil spring assembly according to manufacturer's instructions.; Excel-G |
| 2009 | Nissan | Murano | Rear | Replace suspension strut and coil spring assembly according to manufacturer's instructions.; Excel-G |
| No rows match your filter. | ||||