/live/media/LK/LK_08013_Fro.jpg)
Luk 08-013 Clutch Kit
| Brand | Luk 08-013 |
|---|---|
| Clutch Diameter | 10-3/16" |
| Clutch Disc Diameter | 8-7/16" |
| Clutch Disc Spline Quantity | 24 |
| Clutch Plate Facing Outer Diameter | 8-3/8" |
| Input Shaft Diameter | 1" |
| Kit contents | Cover Assembly, Clutch Disc, Release Bearing, all Necessary Pilots, Accessory Pack |
| Number of clutch disc springs | 4 |
| Pressure Plate Type | Pull Type Diaphragm |
| Fits | Honda · 2 vehicles |
OE supplier pedigree. Developed to meet original-equipment performance specifications.
Complete kit. Includes the clutch disc, cover assembly, release bearing, pilots, and accessory pack.
Pull-type diaphragm. Uses a diaphragm pressure plate for consistent clutch engagement.
Cross-references AMS Automotive 08-013, Edelmann 92140 and Sachs KF705-01 for the same application. See all 11.
LuK 08-013 Clutch Kit for Honda Prelude
The LuK 08-013 transmission clutch kit is built for 1988-1989 Honda Prelude applications and follows original-equipment engineering standards. It includes the core clutch components needed for a proper clutch service on the Prelude, with specifications matched to the vehicle’s pull-type diaphragm setup.
Key Features
- Fits 1988-1989 Honda Prelude
- LuK RepSet-style clutch service components for OE-focused repair
- Pull type diaphragm pressure plate design
- Clutch disc diameter: 8-7/16 in.
- Clutch diameter: 10-3/16 in.
- 24-spline clutch disc with 1 in. input shaft diameter
- Clutch plate facing outer diameter: 8-3/8 in.
- 4-spring clutch disc construction
- Kit contents include cover assembly, clutch disc, release bearing, all necessary pilots, and accessory pack
Detailed Description
LuK 08-013 is a transmission clutch kit engineered for Honda Prelude models from 1988-1989. As an OE supplier, LuK develops application-specific performance specifications, and this kit reflects that approach with matched clutch dimensions, spline count, and pull-type diaphragm pressure plate design. The included cover assembly, clutch disc, release bearing, pilots, and accessory pack provide the primary components needed for a complete clutch replacement on the 1988-1989 Honda Prelude. This part cross-references Sachs KF705-01 and Valeo 52102401 for the same application.
Common Repair Uses
- Restoring clutch engagement after slipping under load
- Addressing chatter, shudder, or uneven take-up during shifts
- Replacing a worn release bearing that causes noise during pedal operation
- Correcting hard shifting caused by clutch wear or mismatch
- Servicing a worn clutch disc or pressure plate on a Honda Prelude
Installation Notes and Tips
Verify the pull-type diaphragm configuration, 24-spline disc count, and 1 in. input shaft diameter before installation. Inspect the flywheel surface, pilot components, and hydraulic release system during service, and confirm all mating surfaces are clean before assembly. For best results, compare the removed parts to the LuK 08-013 kit before final installation on the Honda Prelude.
Quality Assurance
LuK is an original-equipment supplier with extensive in-house manufacturing content, and this clutch kit is built to meet application-specific performance requirements for the listed Honda Prelude fitment.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 1989 | Honda | Prelude | 2.0L | L4 | N/A | — |
| 1988 | Honda | Prelude | 2.0L | L4 | N/A | — |
| No rows match your filter. | ||||||