Mahle 54611 Engine Cylinder Head Gasket - Right

Engine Cylinder Head Gasket Overview

This Mahle engine cylinder head gasket is an OEM-standard sealing component for Mercedes-Benz applications. It uses multi-layered steel construction and is specified for the right side on listed vehicles, with torque-to-yield fastener replacement required for proper installation.

Key Features

• Multi-layered steel construction for cylinder head sealing performance.
• OEM-standard grade for a direct replacement-style application.
• 0.04 in. / 0.94 mm thickness.
• 98.52 mm cylinder bore diameter.
• No gasket sealant included.
• Additional package contents: head gasket.

Detailed Description

Mahle 54611 is an engine cylinder head gasket built for Mercedes-Benz V8 applications that require a multi-layered steel sealing design. It is listed for the right side on models including the Mercedes-Benz G55 AMG, SLK55 AMG, G500, SL55 AMG, ML500, R500, C55 AMG, CL500, CL55 AMG, CLK500, CLK55 AMG, CLS500, CLS55 AMG, E500, E55 AMG, S500, S55 AMG, SL500, and ML55 AMG. The gasket is engineered to match OEM-standard sealing requirements and should be installed with new cylinder head bolts where specified.

This part cross-references FEL-PRO 26624PT for the same application.

Common Repair Uses

• Sealing combustion pressure between the cylinder head and engine block.
• Addressing coolant or oil leakage at the head-to-block interface.
• Restoring compression loss caused by a failed head gasket.
• Supporting repair after cylinder head service or removal.
• Replacing a damaged gasket during engine teardown on Mercedes-Benz V8 engines.

Installation Notes and Quality

Confirm engine code, bore size, and side before installation. The fitment notes specify replacement of cylinder head bolts for proper installation of the multi-layered steel gasket. Torque-to-yield fasteners must be replaced according to service procedures. Mahle gaskets are trusted by OEMs and technicians worldwide for sealing applications.