Mahle 55135 Engine Cylinder Head Gasket - Right

Engine Cylinder Head Gasket Overview

The Mahle 55135 engine cylinder head gasket is an OEM-standard sealing component built with multi-layered steel construction. It is made for confirmed applications on select Ford engines and is specified for use where precise head sealing is required.

Fits 2015-2017 Ford F-150, right. Fits 2015-2017 Ford Mustang, right. The Mahle 55135 is built around a 0.037-inch gasket thickness and a 3.71-inch bore diameter for the listed applications.

• Multi-layered steel construction for cylinder head sealing
• OEM-standard grade for direct replacement use
• 0.037-inch thickness for the specified application
• 3.71-inch bore diameter
• Includes cylinder head gasket

Application Details

This engine cylinder head gasket is used to seal the joint between the cylinder head and engine block on the listed Ford applications. It is a fitment-specific part for the 2015-2017 Ford F-150 and 2015-2017 Ford Mustang, right-side applications, and the installation notes specify that replacement of cylinder head bolts is necessary for proper installation of the multi-layered steel gasket. Part number 55135 should be matched to the vehicle and engine configuration before installation.

Common Problems It Can Address

• Coolant or combustion leakage at the cylinder head sealing surface
• Loss of compression from a compromised head gasket
• Sealing issues after cylinder head service or engine repair
• Improper sealing when the original gasket is worn or damaged

Installation Notes

Confirm engine fitment before installation and follow the listed application notes for the 2015-2017 Ford F-150 and Ford Mustang. The fitment data states that replacement cylinder head bolts are necessary for proper installation of the multi-layered steel gasket. Clean and inspect the mating surfaces carefully, and verify the gasket orientation and bore alignment before assembly. Part number 55135 should be installed only on the confirmed applications.

Quality Assurance

Mahle gaskets are sealing products trusted by OEMs and technicians worldwide. This part is listed as OEM Standard, and the Mahle 55135 follows that specification for the confirmed Ford applications.