/live/media/MS/MS_BJ59405_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
MAS Chassis BJ59405 Suspension Ball Joint - Front Lower
| Brand | MAS Chassis BJ59405 |
|---|---|
| Position | Front Lower |
| Material | Steel |
| Stud Thread Diameter | 14 |
| Castle Nut Included | No |
| Suspension Grade Type | Standard |
| Cotter Pin Hole | No |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 3 |
| Adjustable | No |
| Greaseable | No |
| Stud Type | Tapered |
| Mounting Type | Bolt on |
| Dust Boot Material | Rubber |
| Attachment Type | Taper |
| Bearing Material | Polymer |
| Bolts/Studs Included | Yes |
| Housing Press Fit Diameter | 0 |
| Package Contents | 1 ball joint; 2 bolts; 1 nut |
| Thread Pitch | 1.5 |
| Fits | Acura and Honda · 9 vehicles |
OE-style replacement. Built for specific suspension applications with a direct replacement design.
Steel construction. Uses a rubber dust boot and polymer bearing material for durable service.
Bolt-on design. Includes mounting hardware for a straightforward suspension repair.
Cross-references Centric Parts 610.40000, Delphi TC3679 and Mevotech Supreme MS60517 for the same application. See all 7.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Suspension Ball Joint Overview
The MAS Chassis BJ59405 suspension ball joint is a direct replacement for specific front lower suspension applications. It is built from steel and tested for reliable OE-style service on Acura ILX and Honda Civic models.
Key Features
- Steel construction with a rubber dust boot for durable suspension service.
- Bolt-on mounting design with included mounting hardware for straightforward replacement.
- Standard-grade ball joint with a tapered stud and polymer bearing material.
- Non-adjustable, non-greaseable design for a maintenance-free setup.
- Part number BJ59405 for accurate ordering and catalog matching.
Detailed Description
MAS Chassis BJ59405 is engineered as a replacement suspension ball joint for specific Acura ILX and Honda Civic front lower applications. The steel housing, tapered stud, and rubber boot are paired with a polymer bearing surface to support consistent suspension articulation in normal road use. This part number, BJ59405, is intended for buyers replacing worn OE-style ball joints on these fitments.
This part cross-references MOOG Chassis Products K500234 and Delphi TC3679 for the same application.
Common Problems It Can Address
- Clunking or popping noises from the front suspension.
- Excessive play in the lower suspension joint.
- Uneven tire wear caused by worn suspension geometry.
- Loose or imprecise steering feel from a deteriorated ball joint.
Installation Notes and Tips
Fits 2013-2015 Acura ILX, Front Lower. Fits 2012-2015 Honda Civic, Front Lower. Verify the mounting style, stud thread diameter, and taper before installation. The bolt-on design uses included mounting hardware, and the part is not adjustable or greaseable.
Quality Assurance
MAS Chassis states this ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2015 | Acura | ILX | — | — | Front Lower | — |
| 2015 | Honda | Civic | 1.8L | L4 | Front Lower | — |
| 2015 | Honda | Civic | 1.5L | L4 | Front Lower | — |
| 2014 | Acura | ILX | — | — | Front Lower | — |
| 2014 | Honda | Civic | 1.8L | L4 | Front Lower | — |
| 2014 | Honda | Civic | 1.5L | L4 | Front Lower | — |
| 2013 | Acura | ILX | — | — | Front Lower | — |
| 2013 | Honda | Civic | — | — | Front Lower | — |
| 2012 | Honda | Civic | — | — | Front Lower | — |
| No rows match your filter. | ||||||