/live/media/MS/MS_SL50525_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
MAS Chassis SL50525 Suspension Stabilizer Bar Link Kit - Rear
| Brand | MAS Chassis SL50525 |
|---|---|
| Position | Rear |
| Length | 170 |
| End 1 Type | Male threaded |
| End 2 Type | Male threaded |
| Pre-Greased | No |
| Bushings Included | Yes |
| Dust Boot Included | No |
| Grease Fittings Included | No |
| Bolt Thread Size | 10 |
| Washers Included | No |
| Grade Type | Regular |
| Bolts Included | No |
| Greaseable | No |
| Bearing Material | Polymer |
| Bolt Thread Pitch | 1.25 |
| Locking Nuts Included | No |
| Adjustable | No |
| End 1 Attachment Size | 10 mm |
| Finish | Coated |
| Link Material | Steel |
| Mounting Hardware Included | Yes |
| Package Contents | 1 stabilizer bar link; 2 nuts |
| Sleeve Included | No |
| Spacer Included | No |
| Threaded End | Yes |
| Weight | 0.59 lb |
| Fits | Acura · 12 vehicles |
Direct replacement. Built for OE-style suspension service on specific applications.
Coated steel body. Adds surface protection while maintaining link strength.
Polymer bearing material. Supports smooth articulation at the stabilizer connection.
Cross-references Delphi TC5539, Mevotech Supreme MS60872 and MOOG Chassis Products K750380 for the same application. See all 8.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Suspension Stabilizer Bar Link Kit
MAS Chassis SL50525 is a suspension stabilizer bar link kit built for direct replacement on specific applications. It is engineered and tested for dependable service, with a coated steel link and polymer bearing material for the stabilizer bar connection.
Key Features
- Coated steel construction for corrosion resistance and strength
- Polymer bearing material for controlled articulation
- Male threaded ends for secure attachment
- Includes bushings and mounting hardware
- Non-adjustable design for OE-style replacement
Detailed Description
SL50525 is a rear stabilizer bar link kit for 2007-2018 Acura RDX applications. The link uses male threaded ends, a 10 mm end attachment size, and a 10 x 1.25 thread specification to match the original suspension connection on the Acura RDX. Its steel link body is coated for added surface protection, while the polymer bearing material supports consistent movement at the sway bar connection. This part number, SL50525, is a direct-fit replacement choice for restoring stabilizer bar function on the Acura RDX.
This part cross-references Delphi TC5539 and MOOG Chassis Products K750380 for the same application.
What It Is Used For
- Clunking or looseness from a worn stabilizer bar link
- Excess body roll caused by degraded sway bar connection parts
- Uneven suspension response from worn link bushings
- Noise over bumps from play in the rear stabilizer linkage
Installation Notes and Tips
Verify thread size, end type, and rear fitment before installation. The link is not adjustable, so the replacement should match the original application and suspension layout. Confirm the vehicle uses the rear stabilizer bar link configuration listed for this part number, SL50525.
Quality Assurance
MAS Chassis states that this part is precision-engineered and rigorously tested for reliable replacement of the original equipment on specific vehicles.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2018 | Acura | RDX | Rear | — |
| 2017 | Acura | RDX | Rear | — |
| 2016 | Acura | RDX | Rear | — |
| 2015 | Acura | RDX | Rear | — |
| 2014 | Acura | RDX | Rear | — |
| 2013 | Acura | RDX | Rear | — |
| 2012 | Acura | RDX | Rear | — |
| 2011 | Acura | RDX | Rear | — |
| 2010 | Acura | RDX | Rear | — |
| 2009 | Acura | RDX | Rear | — |
| 2008 | Acura | RDX | Rear | — |
| 2007 | Acura | RDX | Rear | — |
| No rows match your filter. | ||||