/live/media/MS/MS_SL65505_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
MAS Chassis SL65505 Suspension Stabilizer Bar Link Kit - Rear
| Brand | MAS Chassis SL65505 |
|---|---|
| Position | Rear |
| Length | 100 |
| End 1 Type | Male threaded |
| End 1 Type | Rosca macho |
| End 2 Type | Male threaded |
| End 2 Type | Rosca macho |
| Pre-Greased | No |
| Pre-Greased | Non |
| Bushings Included | No |
| Bushings Included | Non |
| Dust Boot Included | Oui |
| Dust Boot Included | Sí |
| Dust Boot Included | Yes |
| Grease Fittings Included | Oui |
| Grease Fittings Included | Sí |
| Grease Fittings Included | Yes |
| Washers Included | No |
| Washers Included | Non |
| Grade Type | Reemplazo estándar |
| Grade Type | Standard replacement |
| Bolts Included | No |
| Bolts Included | Non |
| Sleeve Included | No |
| Sleeve Included | Non |
| Greaseable | Oui |
| Greaseable | Sí |
| Greaseable | Yes |
| Bearing Material | Metal |
| Locking Nuts Included | Oui |
| Locking Nuts Included | Sí |
| Locking Nuts Included | Yes |
| Fits | Mazda · 9 vehicles |
OE-style replacement. Built as a standard replacement for dependable suspension service.
Greaseable design. Includes grease fittings, a dust boot, and metal bearings.
Steel construction. Coated finish adds surface protection for everyday driving.
Cross-references Centric Parts 606.61024, Delphi TC2649 and Mevotech Supreme MS76831 for the same application. See all 10.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Rear Stabilizer Bar Link Kit
The MAS Chassis SL65505 is a rear suspension stabilizer bar link kit built as a standard replacement for specific applications. It is engineered for reliable OE-style service and tested for consistent performance on the vehicle.
Key Features
- Standard replacement stabilizer bar link kit for rear suspension service.
- Steel link construction with a coated finish for added surface protection.
- Male threaded ends with 10 mm attachment sizes on both sides.
- Greaseable design with grease fittings, dust boot, and metal bearings.
- Locking nuts included for secure fastening.
Detailed Description
Fits 2007-2015 Mazda CX-9, rear. The SL65505 is designed for the rear stabilizer bar connection point and uses a steel link body with male threaded ends for direct replacement service. Its greaseable construction, coated finish, and included dust boot help support long-term suspension operation under normal road use. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. The MAS Chassis SL65505 is a practical choice when replacing worn sway bar link hardware on a Mazda CX-9.
Common Uses
- Clunking or rattling from the rear suspension.
- Excess play in the stabilizer bar connection.
- Worn or damaged link joints.
- Loss of stable sway bar response during cornering.
Installation Notes and Tips
Confirm rear fitment before installation and match the 10 mm attachment size to the existing hardware. Inspect the stabilizer bar and surrounding bushings for wear before replacing the link. Torque fasteners to the vehicle manufacturer’s specification and verify that the link is seated correctly after installation.
Quality Assurance
MAS Chassis states that this part is precision-engineered and rigorously tested to provide reliable replacement performance for the original equipment application.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2015 | Mazda | CX-9 | Rear | — |
| 2014 | Mazda | CX-9 | Rear | — |
| 2013 | Mazda | CX-9 | Rear | — |
| 2012 | Mazda | CX-9 | Rear | — |
| 2011 | Mazda | CX-9 | Rear | — |
| 2010 | Mazda | CX-9 | Rear | — |
| 2009 | Mazda | CX-9 | Rear | — |
| 2008 | Mazda | CX-9 | Rear | — |
| 2007 | Mazda | CX-9 | Rear | — |
| No rows match your filter. | ||||