/live/media/MP/MP_95443M_FRO.JPG)
OE Quality
60-Day Returns
Maval 95443M Rack and Pinion Assembly
Remanufactured Steering Rack for 2009 Ford Flex
This Maval remanufactured rack and pinion assembly is built for the 2009 Ford Flex and is identified by part number 95443M. It is a direct steering gear replacement for vehicles with the confirmed application listed below, with inner tie rods included and OE-style port and mounting dimensions.
Key Features
- Remanufactured rack and pinion assembly from Maval
- Fits 2009 Ford Flex
- Part number 95443M
- Inner tie rods included
- 2 mounting holes with 17 in. / 431.8 mm spacing
- 3 turns lock-to-lock for steering response consistent with the original application
- O-ring hose port type
- Steel and aluminum casting construction
- Input shaft diameter: 0.73 in. / 18.42 mm
- Rack length: 54.25 in. / 1377.95 mm
Product Details
The Maval Remanufactured Rack and Pinion line focuses on steering gear replacement assemblies that match key OE dimensions and connection points. This 95443M unit uses an O-ring hose port design, a 1.38 in. / 34.93 mm input shaft length, and a 2.96 in. / 75.06 mm thread length. Port sizing includes a 0.556 in. port ID and a 0.436 in. return port ID, supporting a proper hydraulic steering connection on the confirmed application. This part cross-references Cardone Reman 22-2003 for the same application.
Common Steering Issues This Part Can Address
- Excessive steering play or looseness
- Fluid leakage at the rack or hose ports
- Rough, inconsistent steering effort
- Worn internal steering gear components
- Noise or binding from the steering rack assembly
Installation Notes
Verify the mounting hole spacing, input shaft dimensions, and hose port style before installation. This rack and pinion is listed for the 2009 Ford Flex, so confirm the vehicle’s steering configuration and compare the original unit to the replacement part number 95443M before removal. Professional installation and a complete alignment are recommended after steering gear replacement.
Quality Assurance
Maval remanufactured steering components are rebuilt to replace worn original equipment steering gears with attention to fitment-critical dimensions and connection points. For the confirmed 2009 Ford Flex application, this remanufactured rack and pinion provides a service replacement option built around the original steering layout.
| Brand | Maval |
|---|---|
| Part Number | 95443M |
| Position | Remanufactured Rack and Pinion |
| Mounting Hole Quantity | 2 |
| Total Turns Lock To Lock | 3 |
| Inner Tie Rods Included | Yes |
| Casting Material | Steel; aluminum |
| Distance Between Mounting Holes | 17 |
| Distance Between Mounting Holes | 431.8 |
| Hose Port Type | O-ring |
| Input Shaft Diameter | 0.73 |
| Input Shaft Diameter | 18.42 |
| Input Shaft Length | 1.38 |
| Input Shaft Length | 34.93 |
| Port ID Size | 0.556 |
| Rack Length | 1377.95 |
| Rack Length | 54.25 |
| Return Port ID Size | 0.436 |
| Thread Length | 2.96 |
| Thread Length | 75.06 |
This part fits 1 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2009 | Ford | Flex | N/A | Fits all models.; Remanufactured Rack and Pinion |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.