/live/media/MP/MP_95463M_Generic.jpg)
Maval 95463M Rack and Pinion Assembly
| Brand | Maval 95463M |
|---|---|
| Mounting Hole Quantity | 2 |
| Total Turns Lock To Lock | 3.13 |
| Inner Tie Rods Included | Yes |
| Casting Material | Aluminum |
| Distance Between Mounting Holes | 22 |
| Distance Between Mounting Holes | 558.8 |
| Hose Port Type | O-ring |
| Input Shaft Diameter | 0.78 |
| Input Shaft Diameter | 19.89 |
| Input Shaft Length | 1.63 |
| Input Shaft Length | 41.28 |
| Pressure Port Thread Size | M18 x 1.5 |
| Rack Length | 1339.85 |
| Rack Length | 52.75 |
| Return Port Thread Size | M16 x 1.5 |
| Thread Length | 2.25 |
| Thread Length | 57.15 |
| Product line | Reman Rack and Pinion Assembly |
| Fits | Jeep · 3 vehicles |
Remanufactured rack and pinion. A rebuilt steering gear assembly for direct replacement use.
Aluminum construction. Lightweight material helps keep the assembly strong and responsive.
Inner tie rods included. Saves time by providing key steering components in one assembly.
Cross-references Cardone Reman 22-3062 and 52124600AA for the same application. See all 2.
Maval Remanufactured Rack and Pinion for Jeep Commander
The Maval 95463M remanufactured rack and pinion assembly is built for steering restoration on 2008-2010 Jeep Commander applications. It features an aluminum casting, inner tie rods included, and OE-style port and shaft dimensions for a direct replacement approach.
Key Features
- Remanufactured rack and pinion assembly from Maval
- Fits 2010 Jeep Commander, N/A
- Fits 2009 Jeep Commander, N/A
- Fits 2008 Jeep Commander, N/A
- Inner tie rods included
- Aluminum casting material
- 2 mounting holes with 22 in. / 558.8 mm mounting-hole spacing
- 3.13 total turns lock to lock
- O-ring hose port type
- Pressure port thread size: M18 x 1.5
- Return port thread size: M16 x 1.5
Product Details
Maval Remanufactured Rack and Pinion 95463M is a steering gear assembly for Jeep Commander models from 2008 through 2010. The unit measures 52.75 in. rack length and uses a 0.78 in. input shaft diameter with a 1.63 in. input shaft length, supporting OE-style fitment where the original steering rack has worn, leaked, or developed excessive play. This part cross-references Cardone Reman 22-3062 for the same application.
The Maval remanufactured rack and pinion line focuses on replacement steering components that match the original mounting and connection points needed for service work. For Jeep Commander owners searching for a remanufactured rack and pinion assembly, part number 95463M provides a direct-fit option with the specified port thread sizes, aluminum housing, and included inner tie rods.
Common Uses
- Corrects steering looseness or excessive free play
- Addresses fluid leakage from worn rack seals or ports
- Replaces a binding or hard-to-turn steering rack
- Restores steering response after internal rack wear
- Serves as a replacement for damaged OE steering gear on Jeep Commander models
Installation Notes
Verify the mounting-hole spacing, input shaft dimensions, and port thread sizes against the original unit before installation. This rack uses O-ring hose ports and is specified for 2008-2010 Jeep Commander applications, so confirm the vehicle build details and steering configuration during diagnosis. After installation, perform a professional alignment and inspect the hydraulic system for leaks and proper steering operation.
Quality Assurance
This Maval remanufactured rack and pinion assembly is rebuilt to replace the original steering gear with the listed OE-style dimensions and connection points. The remanufactured construction, aluminum casting, and included inner tie rods support a service-ready steering repair for Jeep Commander applications.
| Year | Make | Model | Notes |
|---|---|---|---|
| 2010 | Jeep | Commander | Reman Rack and Pinion Assembly |
| 2009 | Jeep | Commander | Fits all models.; Remanufactured Rack and Pinion |
| 2008 | Jeep | Commander | (From 9/12/2007); Remanufactured Rack and Pinion |
| No rows match your filter. | |||