/live/media/2M/2M_050832_Fro.jpg)
Metelli 05-0832 Brake Master Cylinder
| Brand | Metelli 05-0832 |
|---|---|
| Condition | NEW |
| Forward Outlet Size | M12 X 1.0 |
| Housing Material | Aluminium |
| Master Cylinder Bore Diameter | 26.99 |
| Number of Outlets | 2 |
| Rearward Outlet Size | M12 X 1.0 |
| Reservoir Included | NO |
| Product line | New Master Cylinder |
| Fits | Volkswagen and Porsche · 9 vehicles |
New master cylinder. Fresh replacement for dependable brake hydraulic performance.
Aluminium housing. Lightweight construction helps resist corrosion.
Dual outlets. Supports a clean, efficient brake fluid connection layout.
Cross-references ATE 010811, CSF 10811 and Wix 51212 for the same application. See all 19.
Brake Master Cylinder for Porsche and Volkswagen
Metelli New Master Cylinder 05-0832 is a new brake master cylinder built with an aluminium housing and a 26.99 mm bore diameter. It uses M12 x 1.0 forward and rearward outlet sizes and is supplied without a reservoir. This brake hydraulics component is listed for Porsche Cayenne and Volkswagen Touareg applications with direct fitment details below.
Key Features
- Brand: Metelli
- Brand line: New Master Cylinder
- Part number: 05-0832
- Aluminium housing for brake system service replacement
- 26.99 mm master cylinder bore diameter
- Two outlets with M12 x 1.0 forward and rearward outlet sizes
- New condition
- Reservoir not included
Product Details
The Metelli New Master Cylinder line focuses on replacement brake hydraulics for vehicles that require accurate hydraulic pressure transfer and OE-style fitment. Part number 05-0832 is a brake master cylinder for Porsche Cayenne and Volkswagen Touareg models listed in the fitment data, including 2003-2008 Porsche Cayenne and 2004-2007 Volkswagen Touareg applications. This part cross-references ATE 010811 and Wix 51212 for the same application.
What This Part Helps Address
- Low or inconsistent brake pedal response
- Internal master cylinder leakage
- Brake fluid bypass within the hydraulic circuit
- Loss of hydraulic pressure to the brake system
- Brake warning concerns related to master cylinder wear
Installation Notes
- Verify bore diameter, outlet thread size, and reservoir configuration before installation.
- Confirm vehicle-specific fitment for Porsche Cayenne and Volkswagen Touareg by model year and brake setup.
- Bleed the brake system thoroughly after installation to remove trapped air.
- Inspect brake lines, fittings, and fluid condition during replacement.
Quality Assurance
Metelli’s New Master Cylinder line is built for brake system replacement applications where correct hydraulic sizing and outlet configuration matter. Part number 05-0832 is a new component with aluminium construction and application-specific fitment for Porsche Cayenne and Volkswagen Touareg models.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2008 | Porsche | Cayenne | N/A | 380mm Front Disc; New Master Cylinder |
| 2007 | Volkswagen | Touareg | N/A | New Master Cylinder |
| 2006 | Porsche | Cayenne | N/A | New Master Cylinder |
| 2006 | Volkswagen | Touareg | N/A | New Master Cylinder |
| 2005 | Porsche | Cayenne | N/A | New Master Cylinder |
| 2005 | Volkswagen | Touareg | N/A | New Master Cylinder |
| 2004 | Porsche | Cayenne | N/A | New Master Cylinder |
| 2004 | Volkswagen | Touareg | N/A | New Master Cylinder |
| 2003 | Porsche | Cayenne | N/A | 350mm Front Disc; New Master Cylinder |
| No rows match your filter. | ||||