Mevotech DX411 CV Joint Boot - Front Inner

CV Joint Boot for Front Inner Applications

The Mevotech DX411 is a conical neoprene CV joint boot for front inner driveline service. It includes grease and two adjustable clamps to help restore a sealed, serviceable joint assembly on select BMW, Ford, and Lincoln applications.

Key Features

• Neoprene construction for flexible CV joint protection
• Conical boot shape for front inner axle applications
• Includes grease for joint servicing
• Includes 2 clamps with adjustable fit
• Large-end clamp minimum diameter: 3.67 in.
• Front position application

Detailed Product Information

Mevotech DX411 is a front inner CV joint boot built for driveline maintenance where the original boot has cracked, split, or lost its seal. The neoprene material provides the flexibility needed around the joint while the conical profile helps support a proper fit during replacement. This part cross-references Monroe Shocks & Struts (e.g., 86-2470) for the same application. Use DX411 when servicing select 2005-2018 Ford Taurus, Ford Taurus X, Ford Five Hundred, Ford Freestyle, Mercury Sable, Lincoln MKS, BMW 740i xDrive, and BMW 750i xDrive front inner positions. The Mevotech DX411 is a practical replacement for restoring grease retention and protecting the CV joint from contamination.

Common Problems This Part Helps Address

• Split or torn CV boot material
• Grease leakage from the front inner joint
• Road debris and moisture entering the axle joint
• Clicking or vibration caused by boot failure and joint wear
• Need for a replacement boot during CV joint service

Installation Notes and Tips

• Confirm front inner fitment before installation.
• Clean the joint thoroughly before packing with the included grease.
• Position the boot evenly on the shaft and housing before tightening the clamps.
• Use the adjustable clamps to secure both ends without over-compressing the boot.
• Inspect the CV joint for wear or contamination before reassembly.

Quality Assurance

Mevotech manufactures driveline hardware for service replacement applications, and DX411 is built to match the listed front inner fitments with the included grease and clamps for a complete boot service.