Mevotech DX577 CV Joint Boot - Front Inner or Rear Inner

Mevotech DX577 CV Joint Boot for Mitsubishi Lancer

The Mevotech DX577 is a neoprene CV joint boot built for rear driveline service and listed for select Mitsubishi Lancer applications. It includes grease and two adjustable clamps to support a secure, service-ready replacement for worn or damaged CV boot assemblies.

Key Features

• Neoprene CV joint boot construction
• Includes grease for installation service
• Two clamps included
• Adjustable clamp design for fitment setup
• Cylindrical boot profile
• Rear-position hardware application
• Mevotech DX577 part number for direct reference

Detailed Description

Mevotech DX577 is a CV joint boot for driveline and axle service, built with neoprene material and supplied with grease and clamps. The cylindrical design and adjustable clamp setup help support a proper seal at the joint, while the large-end clamp minimum diameter of 3.255 inches provides a useful sizing reference during replacement. This part cross-references Beck/Arnley 103-3049 for the same application. It is listed for Mitsubishi Lancer front inner and rear inner positions, including rear inner Canadian-built coverage, making it a relevant choice when servicing a Mitsubishi Lancer CV axle boot on confirmed applications.

Vehicle Fitment

• Fits 2008-2017 Mitsubishi Lancer, Front Inner
• Fits 2009-2010 Mitsubishi Lancer, Rear Inner
• Fits 2008-2010 Mitsubishi Lancer, Rear Inner, Canadian Built

Common Problems This Part Can Address

• Cracked or split CV boot material
• Grease leakage around the CV joint
• Contamination from road debris and moisture
• Boot clamp looseness or loss of seal
• Noise or wear caused by a damaged boot allowing joint contamination

Installation Notes and Tips

Confirm the vehicle position before installation, since DX577 is listed for front inner and rear inner Mitsubishi Lancer applications. Inspect the CV joint for contamination or wear before installing the new boot, and verify clamp placement and diameter during assembly. Use the included grease and adjustable clamps to complete the service, and compare the removed boot dimensions to the new part before final tightening.

Quality Assurance

Mevotech supplies this CV joint boot as a service replacement part for confirmed driveline applications. The neoprene construction, included grease, and included clamps provide the core components needed for a proper CV boot repair on listed Mitsubishi Lancer fitments.