/live/media/ME/ME_H510095_Fro.jpg)
Mevotech H510095 Wheel Bearing - Front
| Brand | Mevotech H510095 |
|---|---|
| Position | Front |
| ABS Sensor | Non Integral |
| Design Type | Gen 1 |
| Inside Diameter | 52 mm |
| Outside Diameter | 91 mm |
| Pre Greased | Yes |
| Width | 3.585 |
| Fits | Acura and Honda · 19 vehicles |
Pre-greased design. Ready for installation with no extra packing required.
ABS sensor non-integral. Uses a separate sensor setup for a simpler bearing design.
Wheel bearing. Built for smooth wheel rotation and dependable driveline support.
Cross-references Centric Parts 412.40025, Centric Parts 412.40025E and Dorman - OE Solutions 930-006 for the same application. See all 19.
Front Wheel Bearing for Acura and Honda
Mevotech H510095 is a pre-greased front wheel bearing for select Acura and Honda applications. It is built with a Gen 1 design, a non-integral ABS sensor setup, and the dimensions needed for a direct replacement on listed vehicles.
- Brand: Mevotech
- Part number: H510095
- Front wheel bearing application
- Pre-greased for service-ready installation
- Gen 1 design
- Non-integral ABS sensor
- Inside diameter: 52 mm
- Outside diameter: 91 mm
- Width: 3.585
Vehicle Fitment
- Fits 2009-2013 Acura TL, front
- Fits 2009-2013 Acura TSX, front
- Fits 2012-2013 Honda Crosstour, front
- Fits 2008-2012 Honda Accord, front
- Fits 2010-2011 Honda Accord Crosstour, front
Product Details
This Mevotech wheel bearing is intended for front hub service on the Acura TL, Acura TSX, Honda Accord, Honda Crosstour, and Honda Accord Crosstour listed above. The pre-greased construction helps simplify replacement work, while the 52 mm inside diameter and 91 mm outside diameter support proper fitment in the specified front wheel bearing location. This part cross-references Timken WB000019 and SKF FW26 for the same application.
Common Repair Uses
- Front wheel noise or growling from a worn bearing
- Excessive play or looseness at the front hub
- Rough wheel rotation during inspection
- ABS-related service where the bearing uses a non-integral sensor arrangement
- Restoring proper front-end bearing support on listed Acura and Honda models
Installation Notes
Confirm the vehicle year, model, and front position before installation. Match the bearing dimensions and ABS sensor style to the original part, and inspect the hub, knuckle, and related components for wear before assembly. Proper press-fit procedures and torque specifications should be followed during service.
Quality Assurance
Mevotech supplies this wheel bearing as an OE-style replacement component for the listed Acura and Honda applications. The H510095 part number can also help verify interchange when sourcing the correct front bearing for service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2013 | Acura | TL | Front | — |
| 2013 | Acura | TSX | Front | — |
| 2013 | Honda | Crosstour | Front | — |
| 2012 | Acura | TL | Front | — |
| 2012 | Acura | TSX | Front | — |
| 2012 | Honda | Accord | Front | — |
| 2012 | Honda | Crosstour | Front | — |
| 2011 | Acura | TL | Front | — |
| 2011 | Acura | TSX | Front | — |
| 2011 | Honda | Accord | Front | — |
| 2011 | Honda | Accord Crosstour | Front | — |
| 2010 | Acura | TL | Front | — |
| 2010 | Acura | TSX | Front | — |
| 2010 | Honda | Accord | Front | — |
| 2010 | Honda | Accord Crosstour | Front | — |
| 2009 | Acura | TL | Front | — |
| 2009 | Acura | TSX | Front | — |
| 2009 | Honda | Accord | Front | — |
| 2008 | Honda | Accord | Front | — |
| No rows match your filter. | ||||