/live/media/ME/ME_H513029_Fro.jpg)
Mevotech H513029 Wheel Bearing - Rear, Rear Inner or Rear Outer
| Brand | Mevotech H513029 |
|---|---|
| Position | Rear Outer, Rear, and Rear Inner |
| Width | 1.1023 |
| ABS Sensor | Non integral |
| Design Type | Gen 1 |
| Inside Diameter | 28 mm |
| Outside Diameter | 50.29 mm |
| Pre Greased | Yes |
| Fits | Dodge and Mitsubishi · 18 vehicles |
Pre-greased design. Arrives ready for smoother, faster installation.
Gen 1 wheel bearing. A proven design for dependable wheel support.
Non-integral ABS sensor. Keeps the sensor separate from the bearing assembly.
Cross-references Centric Parts 410.46001E, InMotion Parts WT513029 and 410.46001 for the same application. See all 10.
Mevotech H513029 Wheel Bearing for Rear Applications
Mevotech H513029 is a pre-greased wheel bearing built for rear outer and rear positions on select Dodge Colt and Mitsubishi Mirage models. It is a Gen 1 design with a non-integral ABS sensor, made for service work where correct dimensions and bearing fit are critical.
Key Features
- Pre-greased for ready-to-install service preparation
- Gen 1 wheel bearing design
- Non-integral ABS sensor configuration
- Inside diameter: 28 mm
- Outside diameter: 50.29 mm
- Width: 1.1023 in.
Detailed Description
This Mevotech wheel bearing, part number H513029, is specified for rear outer and rear wheel bearing applications on 1985-1990 Dodge Colt and 1985-1988 Mitsubishi Mirage models. The bearing’s 28 mm inside diameter, 50.29 mm outside diameter, and 1.1023-inch width provide the dimensional detail needed for accurate replacement selection. Because it is pre-greased and uses a non-integral ABS sensor layout, it is suited to service jobs where the bearing assembly must match the original configuration. This part cross-references Centric Parts 410.46001 for the same application.
What It Helps Address
- Wheel noise from a worn rear bearing
- Excessive play or looseness at the rear wheel
- Rough rotation caused by bearing wear
- Incorrect bearing dimensions during replacement
- Rear bearing service on Dodge Colt and Mitsubishi Mirage vehicles
Installation Notes and Tips
Verify rear outer or rear position fitment before installation. Confirm bearing dimensions, ABS sensor style, and hub or axle specifications against the removed part. Clean the mating surfaces thoroughly and inspect related components for wear before assembly. For fitment-specific service, use H513029 only on the listed Dodge Colt and Mitsubishi Mirage applications.
Quality Assurance
Mevotech supplies suspension and driveline components for service replacement applications, and this bearing is built with the listed dimensional and configuration details for accurate fitment. Part number H513029 is intended for direct replacement use on the confirmed vehicle applications shown above.
- Fits 1985-1990 Dodge Colt, Rear Outer
- Fits 1989-1990 Dodge Colt, Rear
- Fits 1985-1988 Mitsubishi Mirage, Rear Outer
- Fits 1985-1988 Mitsubishi Mirage, Rear
| Year | Make | Model | # Doors | Drive Type | Position | Notes |
|---|---|---|---|---|---|---|
| 1990 | Dodge | Colt | 4 Door | FWD | Rear Outer | — |
| 1990 | Dodge | Colt | 4 Door | FWD | Rear | — |
| 1990 | Dodge | Colt | 2 Door | FWD | Rear Outer | — |
| 1989 | Dodge | Colt | 4 Door | FWD | Rear Outer | — |
| 1989 | Dodge | Colt | 4 Door | FWD | Rear | — |
| 1989 | Dodge | Colt | 2 Door | FWD | Rear Outer | — |
| 1988 | Dodge | Colt | — | FWD | Rear Outer | — |
| 1988 | Mitsubishi | Mirage | — | — | Rear Outer | — |
| 1988 | Mitsubishi | Mirage | — | — | Rear | — |
| 1987 | Dodge | Colt | — | FWD | Rear Outer | — |
| 1987 | Mitsubishi | Mirage | — | — | Rear Outer | — |
| 1987 | Mitsubishi | Mirage | — | — | Rear | — |
| 1986 | Dodge | Colt | — | FWD | Rear Outer | — |
| 1986 | Mitsubishi | Mirage | — | — | Rear Outer | — |
| 1986 | Mitsubishi | Mirage | — | — | Rear | — |
| 1985 | Dodge | Colt | — | FWD | Rear Outer | — |
| 1985 | Mitsubishi | Mirage | — | — | Rear Outer | — |
| 1985 | Mitsubishi | Mirage | — | — | Rear | — |
| No rows match your filter. | ||||||