/live/media/ME/ME_H513219_Fro.jpg)
Mevotech H513219 Wheel Bearing and Hub Assembly - Front
| Brand | Mevotech H513219 |
|---|---|
| Position | Front |
| ABS Sensor | Non Integral |
| Design Type | Gen 3 |
| Flange Bolt Hole Quantity | 4 |
| Inside Diameter | 69 mm |
| Number of Bolt Holes | 5 |
| Outside Diameter | 142 mm |
| Pre Greased | Yes |
| Fits | Mitsubishi · 23 vehicles |
Gen 3 design. Engineered for a modern wheel bearing and hub assembly.
Pre-greased. Ready for installation with reduced setup time.
Non-integral ABS sensor. Uses a separate sensor for a simpler serviceable design.
Cross-references Centric Parts 400.46003E, DuraGo 295-13219 and GMB 748-0153 for the same application. See all 20.
Mevotech H513219 Front Wheel Hub Assembly
The Mevotech H513219 is a front wheel bearing and hub assembly for select Mitsubishi applications. It features a Gen 3 design, is pre-greased, and uses a non-integral ABS sensor setup for direct replacement service on the front axle.
Key Features
- Part number H513219 from Mevotech
- Wheel bearing and hub assembly for the front position
- Gen 3 design for select Mitsubishi driveline and axle applications
- Pre-greased for installation-ready service
- Non-integral ABS sensor configuration
- Inside diameter: 69 mm
- Outside diameter: 142 mm
- 5 bolt holes with 4 flange bolt holes
Application Details
Compatible with front hub service on 2007-2012 Mitsubishi Eclipse, 2004-2012 Mitsubishi Galant, and 2004-2012 Mitsubishi Endeavor applications listed in the fitment data. This Mevotech H513219 hub assembly is also listed for 2006 Mitsubishi Eclipse front applications from 11/01/2005.
This part cross-references Timken HA590108 and SKF BR930413 for the same application.
What It Is Used For
- Replacing a worn or noisy front wheel bearing and hub assembly
- Restoring proper wheel support at the front axle
- Addressing ABS-related service needs on non-integral sensor setups
- Correcting looseness, vibration, or rough rotation at the hub
- Servicing Mitsubishi Eclipse, Galant, and Endeavor front hub applications
Installation Notes and Tips
Verify the vehicle year, model, and front position before ordering. Match the hub dimensions, bolt pattern details, and ABS sensor configuration to the original part. Because this assembly is pre-greased, it is ready for hub service, but proper torque procedures and clean mounting surfaces are still important for a correct installation.
Quality Assurance
Mevotech manufactures this wheel bearing and hub assembly to meet the listed application requirements for Mitsubishi front hub service. Confirm fitment against the vehicle’s original equipment specifications before installation.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2012 | Mitsubishi | Eclipse | — | — | Front | — |
| 2012 | Mitsubishi | Galant | — | — | Front | — |
| 2011 | Mitsubishi | Eclipse | — | — | Front | — |
| 2011 | Mitsubishi | Endeavor | — | — | Front | — |
| 2011 | Mitsubishi | Galant | — | — | Front | — |
| 2010 | Mitsubishi | Eclipse | — | — | Front | — |
| 2010 | Mitsubishi | Endeavor | — | — | Front | — |
| 2010 | Mitsubishi | Galant | — | — | Front | — |
| 2009 | Mitsubishi | Eclipse | — | — | Front | — |
| 2009 | Mitsubishi | Galant | — | — | Front | — |
| 2008 | Mitsubishi | Eclipse | — | — | Front | — |
| 2008 | Mitsubishi | Endeavor | — | — | Front | — |
| 2008 | Mitsubishi | Galant | 3.8L | V6 | Front | — |
| 2007 | Mitsubishi | Eclipse | — | — | Front | — |
| 2007 | Mitsubishi | Endeavor | — | — | Front | — |
| 2007 | Mitsubishi | Galant | 3.8L | V6 | Front | — |
| 2006 | Mitsubishi | Eclipse | — | — | Front | From 11/01/2005 |
| 2006 | Mitsubishi | Endeavor | — | — | Front | — |
| 2006 | Mitsubishi | Galant | 3.8L | V6 | Front | — |
| 2005 | Mitsubishi | Endeavor | — | — | Front | — |
| 2005 | Mitsubishi | Galant | 3.8L | V6 | Front | — |
| 2004 | Mitsubishi | Endeavor | — | — | Front | — |
| 2004 | Mitsubishi | Galant | 3.8L | V6 | Front | — |
| No rows match your filter. | ||||||