/live/media/ME/ME_MB10308_Fro.jpg)
Mevotech MB10308 Wheel Bearing and Hub Assembly - Rear
| Brand | Mevotech MB10308 |
|---|---|
| Position | Rear |
| ABS Sensor | Non Integral |
| Design Type | Gen 3 (Roll-Form Design) |
| Flange Bolt Hole Quantity | 4 |
| Inside Diameter | 63.5 mm |
| Number of Bolt Holes | 5 |
| Outside Diameter | 136 mm |
| Pre Greased | Yes |
| Fits | Volvo · 8 vehicles |
Gen 3 roll-form design. Engineered for a precise, durable wheel bearing and hub assembly.
Pre-greased. Ready for installation with reduced prep time.
Non-integral ABS sensor. Keeps the sensor separate from the hub assembly.
Cross-references Centric Parts 407.39002E, Quality-Built WH590442 and Timken HA590442 for the same application. See all 10.
Rear Wheel Bearing Hub for Volvo XC60
Mevotech MB10308 is a rear wheel bearing and hub assembly for select 2010-2017 Volvo XC60 models. It is built with a Gen 3 roll-form design, comes pre-greased, and uses a non-integral ABS sensor setup for a direct replacement approach on the rear axle.
Key Features
- Fits 2010-2017 Volvo XC60, rear
- Mevotech MB10308 wheel bearing and hub assembly
- Gen 3 roll-form design for the hub assembly construction
- Pre-greased for service-ready installation
- Non-integral ABS sensor configuration
- 5-bolt wheel mounting pattern with 4 flange bolt holes
- Inside diameter: 63.5 mm; outside diameter: 136 mm
Detailed Description
Mevotech MB10308 is a rear wheel bearing and hub assembly engineered for the Volvo XC60 platform from 2010 through 2017. This assembly is specified with a 5-bolt wheel pattern, 4 flange bolt holes, a 63.5 mm inside diameter, and a 136 mm outside diameter. The pre-greased design helps streamline replacement work, while the non-integral ABS sensor layout supports vehicles that use a separate sensor arrangement. If you are sourcing a rear wheel bearing hub for a 2010-2017 Volvo XC60, MB10308 provides the core dimensions and mounting details needed for a proper match.
This part cross-references Timken HA590442 and Quality-Built WH590442 for the same application.
What It Helps Address
- Rear wheel bearing noise or roughness
- Wheel hub play or looseness at the rear axle
- ABS-related service needs tied to the hub assembly layout
- Uneven wheel rotation caused by worn bearing components
- Replacement needs on a Volvo XC60 rear hub assembly
Installation Notes and Tips
Confirm rear fitment by matching the vehicle year, model, and hub dimensions before installation. Verify the 5-bolt wheel pattern, 4 flange bolt holes, and ABS sensor configuration against the original part on the vehicle. Clean the mounting surface thoroughly and inspect surrounding suspension and brake components for wear before installing the new hub assembly. For a Volvo XC60 rear wheel bearing replacement, compare the original hub measurements to MB10308 to ensure the correct application.
Quality Assurance
Mevotech supplies MB10308 as a replacement wheel bearing and hub assembly with defined dimensional and fitment specifications for the listed Volvo XC60 rear applications. The Gen 3 roll-form design and pre-greased construction support consistent service replacement.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2017 | Volvo | XC60 | FWD | Rear | — |
| 2016 | Volvo | XC60 | FWD | Rear | — |
| 2015 | Volvo | XC60 | FWD | Rear | — |
| 2014 | Volvo | XC60 | FWD | Rear | — |
| 2013 | Volvo | XC60 | FWD | Rear | — |
| 2012 | Volvo | XC60 | FWD | Rear | — |
| 2011 | Volvo | XC60 | FWD | Rear | — |
| 2010 | Volvo | XC60 | FWD | Rear | — |
| No rows match your filter. | |||||