/live/media/ME/ME_MB30330_Fro.jpg)
Mevotech MB30330 Wheel Bearing and Hub Assembly - Rear
| Brand | Mevotech MB30330 |
|---|---|
| Position | Rear |
| ABS Sensor | Non Integral |
| Design Type | Gen 3 |
| Flange Bolt Hole Quantity | 4 |
| Inside Diameter | 67.95 mm |
| Number of Bolt Holes | 5 |
| Outside Diameter | 148 mm |
| Pre Greased | Yes |
| Fits | INFINITI and Nissan · 24 vehicles |
Gen 3 design. Engineered for a modern wheel bearing and hub assembly.
Pre-greased. Ready for installation with reduced prep time.
Wheel bearing and hub assembly. Combines the bearing and hub in one service part.
Cross-references MOOG Hub Assemblies 512548, Schaeffler 103197 and SKF BR930868 for the same application. See all 10.
Rear Wheel Bearing Hub Assembly for Nissan and INFINITI
Mevotech MB30330 is a rear wheel bearing and hub assembly built for select Nissan and INFINITI applications. It features a Gen 3 design, is pre-greased, and uses a non-integral ABS sensor layout for service on the rear axle.
- Rear wheel bearing and hub assembly for select Nissan Murano, Pathfinder, and INFINITI QX60/JX35 applications
- Gen 3 design for OE-style hub service
- Pre-greased for ready-to-install service preparation
- Non-integral ABS sensor configuration
- Outside diameter: 148 mm
- Inside diameter: 67.95 mm
- Flange bolt hole quantity: 4
- Number of bolt holes: 5
Fitment and Cross References
Compatible with rear applications on 2015-2023 Nissan Murano, 2014-2020 INFINITI QX60, 2013-2019 Nissan Pathfinder, and 2013 INFINITI JX35. This part cross-references Timken HA590560 and SKF BR930868 for the same application. The Mevotech MB30330 is also referenced by OE and aftermarket numbers including 432023JA0B and 432023JA1B.
What This Hub Assembly Helps Address
- Wheel bearing noise from a worn rear hub assembly
- Excessive wheel play or looseness at the rear axle
- ABS warning concerns related to hub sensor configuration
- Uneven wheel rotation caused by bearing wear
- Rear hub service needs on Nissan Murano, Pathfinder, and INFINITI QX60/JX35 models
Installation Notes and Tips
Verify rear fitment by year, make, and model before installation. Confirm the ABS sensor configuration matches the vehicle’s original setup, and inspect the mounting flange and bolt pattern during service. The pre-greased design supports installation on the rear hub location without additional bearing packing.
Quality Assurance
Mevotech manufactures this wheel bearing and hub assembly as a service replacement part for rear driveline and axle applications. MB30330 is built to match the listed dimensions and fitment requirements for the specified Nissan and INFINITI vehicles.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2023 | Nissan | Murano | AWD | Rear | — |
| 2022 | Nissan | Murano | AWD | Rear | — |
| 2021 | Nissan | Murano | AWD | Rear | — |
| 2020 | INFINITI | QX60 | AWD | Rear | — |
| 2020 | Nissan | Murano | AWD | Rear | — |
| 2019 | INFINITI | QX60 | AWD | Rear | — |
| 2019 | Nissan | Murano | AWD | Rear | — |
| 2019 | Nissan | Pathfinder | 4WD | Rear | — |
| 2018 | INFINITI | QX60 | AWD | Rear | — |
| 2018 | Nissan | Murano | AWD | Rear | — |
| 2018 | Nissan | Pathfinder | 4WD | Rear | — |
| 2017 | INFINITI | QX60 | AWD | Rear | — |
| 2017 | Nissan | Murano | AWD | Rear | — |
| 2017 | Nissan | Pathfinder | 4WD | Rear | — |
| 2016 | INFINITI | QX60 | AWD | Rear | — |
| 2016 | Nissan | Murano | AWD | Rear | — |
| 2016 | Nissan | Pathfinder | 4WD | Rear | — |
| 2015 | INFINITI | QX60 | AWD | Rear | — |
| 2015 | Nissan | Murano | AWD | Rear | — |
| 2015 | Nissan | Pathfinder | 4WD | Rear | — |
| 2014 | INFINITI | QX60 | AWD | Rear | — |
| 2014 | Nissan | Pathfinder | 4WD | Rear | — |
| 2013 | INFINITI | JX35 | AWD | Rear | — |
| 2013 | Nissan | Pathfinder | 4WD | Rear | — |
| No rows match your filter. | |||||