/live/media/ME/ME_MES3608S_Fro.jpg)
Mevotech MES3608S Steering Tie Rod End Adjusting Sleeve - Front
| Brand | Mevotech MES3608S |
|---|---|
| Position | Front |
| Adjustable | Yes |
| Color | Black |
| Configuration | Two Female Ends |
| Diameter | 1.02 |
| Finish | Corrosion Resistant |
| Grade Type | Premium |
| Length | 2.62 |
| Material | Steel |
| Mounting Method | Screws |
| Thread Direction | Counterclockwise |
| Thread Size | M17 x 1.5, M22 x 1.5-LH |
| Thread Type | Medium |
| Fits | Chrysler and Dodge · 30 vehicles |
Adjustable sleeve. Steel construction with two female ends for precise steering linkage setup.
Corrosion resistant finish. Helps protect the black steel sleeve from everyday wear and exposure.
Premium grade. Built with medium threads and a screw-on mounting method for secure installation.
Cross-references Delphi TA5579, Dorman - Premium S3608PR and MOOG Chassis Products ES3608S for the same application. See all 11.
Steering Tie Rod End Adjusting Sleeve for Chrysler and Dodge
The Mevotech MES3608S steering tie rod end adjusting sleeve is a premium steel replacement built for front steering applications that require precise toe adjustment. Its corrosion-resistant black finish and medium thread design support reliable service in demanding road conditions.
Compatible with select Chrysler 300M, Concorde, Intrepid, LHS, and Dodge Intrepid front steering setups, this adjusting sleeve is built with two female ends and a counterclockwise thread direction for the specified applications. The MES3608S is a direct-fit steering hardware solution for vehicles that use M17 x 1.5 and M22 x 1.5-LH thread sizes.
Key Features
- Brand: Mevotech
- Part number: MES3608S
- Steel construction with corrosion-resistant finish
- Black premium-grade sleeve for steering linkage service
- Adjustable design with two female ends
- Counterclockwise thread direction
- Thread sizes: M17 x 1.5 and M22 x 1.5-LH
- Front steering application for select Chrysler and Dodge models
Detailed Description
The Mevotech MES3608S is a steering tie rod end adjusting sleeve used to connect and fine-tune steering linkage geometry during front-end service. Built from steel and finished for corrosion resistance, it is designed for applications that require a premium replacement sleeve with medium thread engagement and a two female end configuration. This part number, MES3608S, is listed for 1998-2004 Chrysler Concorde, 1998-2004 Chrysler Intrepid, 1998-2004 Dodge Intrepid, 1999-2004 Chrysler 300M, and 1999-2001 Chrysler LHS in front steering positions with hex type notes where specified.
This part cross-references Delphi TA5579 and MOOG Chassis Products ES3608S for the same application.
What It Is Used For
- Restoring steering linkage adjustment when the original sleeve is worn or seized
- Correcting toe settings during front-end alignment service
- Replacing a corroded or damaged tie rod end adjusting sleeve
- Addressing steering play caused by worn threaded adjustment hardware
- Supporting proper steering geometry on Chrysler 300M, Concorde, Intrepid, and LHS applications
Installation Notes and Tips
Verify thread direction, thread size, and vehicle application before installation. The MES3608S uses a counterclockwise thread direction and is specified for M17 x 1.5 and M22 x 1.5-LH thread sizes. Because this is a steering adjustment component, final alignment should be checked after installation on the front steering system.
Quality Assurance
Mevotech manufactures this sleeve as a premium-grade steering hardware replacement with a corrosion-resistant finish for long-term service in steering linkage applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2004 | Chrysler | 300M | Front | Hex Type |
| 2004 | Chrysler | Concorde | Front | Hex Type |
| 2004 | Chrysler | Intrepid | Front | Hex Type |
| 2004 | Dodge | Intrepid | Front | Hex Type |
| 2003 | Chrysler | 300M | Front | Hex Type |
| 2003 | Chrysler | Concorde | Front | Hex Type |
| 2003 | Chrysler | Intrepid | Front | Hex Type |
| 2003 | Dodge | Intrepid | Front | Hex Type |
| 2002 | Chrysler | 300M | Front | Hex Type |
| 2002 | Chrysler | Concorde | Front | Hex Type |
| 2002 | Chrysler | Intrepid | Front | Hex Type |
| 2002 | Dodge | Intrepid | Front | Hex Type |
| 2001 | Chrysler | 300M | Front | Hex Type |
| 2001 | Chrysler | Concorde | Front | Hex Type |
| 2001 | Chrysler | Intrepid | Front | Hex Type |
| 2001 | Chrysler | LHS | Front | Hex Type |
| 2001 | Dodge | Intrepid | Front | Hex Type |
| 2000 | Chrysler | 300M | Front | Hex Type |
| 2000 | Chrysler | Concorde | Front | Hex Type |
| 2000 | Chrysler | Intrepid | Front | Hex Type |
| 2000 | Chrysler | LHS | Front | Hex Type |
| 2000 | Dodge | Intrepid | Front | Hex Type |
| 1999 | Chrysler | 300M | Front | Hex Type |
| 1999 | Chrysler | Concorde | Front | Hex Type |
| 1999 | Chrysler | Intrepid | Front | Hex Type |
| 1999 | Chrysler | LHS | Front | Hex Type |
| 1999 | Dodge | Intrepid | Front | Hex Type |
| 1998 | Chrysler | Concorde | Front | Hex Type |
| 1998 | Chrysler | Intrepid | Front | Hex Type |
| 1998 | Dodge | Intrepid | Front | Hex Type |
| No rows match your filter. | ||||