Mevotech MS10402 Suspension Control Arm Bushing - Front Lower

Mevotech MS10402 Suspension Control Arm Bushing

Mevotech MS10402 is a suspension control arm bushing made from natural rubber for front lower strut arm at frame service. It is built for direct replacement use on select Saab applications and is specified as one bushing per part.

Key Features

• Natural rubber construction for suspension isolation and compliance
• Measures 2.215 in. length and 2.0 in. outside diameter
• One-bushing service part for front lower strut arm at frame locations
• Direct-fit replacement for select Saab 9-3 and Saab 900 applications
• Mevotech MS10402 for suspension bushing replacement service

Detailed Description

This Mevotech MS10402 suspension control arm bushing is used at the front lower strut arm at frame position to restore the connection point between the control arm and chassis. The natural rubber material helps maintain the original-style suspension interface while supporting proper arm movement and reducing excess play. This part cross-references Monroe Shocks & Struts (e.g., 4482402) for the same application. Compatible With 1999-2003 Saab 9-3, front lower, strut arm at frame, and 1995-1998 Saab 900, front lower, strut arm at frame.

Common Repair Uses

• Front suspension clunking or looseness at the control arm mount
• Excessive movement in the strut arm at frame connection
• Worn rubber causing vibration transfer into the chassis
• Uneven steering response from deteriorated suspension bushings
• Restoration of factory-style suspension geometry on Saab 9-3 and Saab 900

Installation Notes and Tips

Verify the existing bushing dimensions before installation, including the 2.215-inch length and 2.0-inch outside diameter. This part is for the front lower strut arm at frame location only, so confirm the vehicle position and suspension layout before service. Press-fit suspension bushings typically require proper removal and installation tools to avoid damage to the arm or new bushing.

Quality Assurance

Mevotech suspension components are engineered for replacement service in demanding chassis applications. MS10402 is built as a natural rubber bushing for the specified Saab fitments and is identified by part number MS10402 for ordering and catalog matching.