Mevotech MS25930 Steering King Pin Set - Front

Steering King Pin Set for Precise Front-End Service

Mevotech MS25930 is a steering king pin set built around the key service dimensions needed for front-end repair. With a king pin length of 5.375 inches, a king pin diameter of 0.873 inch, and overall dimensions of 8.0 inches by 8.0 inches, this part is specified for steering hardware applications where accurate fit and alignment matter.

Key Features

• Steering king pin set from Mevotech
• Part number MS25930 for catalog and service reference
• King pin length: 5.375 inches
• King pin diameter: 0.873 inch
• Overall length: 8.0 inches
• Overall thickness: 8.0 inches

Detailed Product Overview

MS25930 is a steering king pin set intended for steering hardware repair where the king pin dimensions must match the original service specification. The listed measurements help identify the correct replacement for applications that require a 5.375-inch king pin length and 0.873-inch diameter. If you are sourcing Mevotech steering hardware for a front-end rebuild, MS25930 provides the dimensional details needed for accurate parts matching. This part cross-references Monroe Shocks & Struts 172286 for the same application.

Common Issues This Part Addresses

• Excessive steering looseness from worn king pin components
• Front-end play that affects steering response
• Uneven steering feel caused by worn hardware
• Service replacement needs during steering linkage repair
• Dimensional mismatch when replacing a worn king pin set

Installation Notes and Tips

Verify the king pin length, diameter, and overall dimensions against the original part before installation. Clean the steering knuckle and related hardware thoroughly, and inspect adjacent steering components for wear before reassembly. Because fitment data is not provided for this part, confirm application details by measurement and vehicle service information before ordering. For buyers searching Mevotech MS25930 for steering king pin set service, dimensional verification is the key step.

Quality Assurance

Mevotech steering hardware is cataloged for service replacement use, and MS25930 is identified by its published dimensions and interchange reference for parts matching. Use the part number MS25930 and the listed measurements to confirm the correct steering king pin set for your application.