Mevotech MS40041 Alignment Caster / Camber Bushing - Front

Mevotech MS40041 Alignment Bushing

Mevotech MS40041 is an adjustable alignment caster/camber bushing for front suspension applications that require precise camber and caster correction. With a 0.77 inside diameter and 1.39 outside diameter, it is built for alignment service on Ford and Dodge heavy-duty trucks where front-end geometry needs to be brought back into spec.

This Mevotech MS40041 alignment bushing is used on front suspension setups for Ford Excursion, Ford F-250 Super Duty, Ford F-350 Super Duty, Dodge Ram 2500, Dodge Ram 3500, Ford F-250, and Ford F-350 applications listed below.

Key Features

• Adjustable caster/camber bushing for front alignment correction
• 0.77 inside diameter and 1.39 outside diameter
• Supports plus or minus 0.25 degree camber and/or caster adjustment
• Hex head adjustment design for alignment setup
• Mevotech MS40041 part number for service identification

Detailed Description

Mevotech MS40041 is an alignment caster/camber bushing used to fine-tune front suspension alignment on select Ford and Dodge trucks. It is specified for vehicles with solid axle and leaf spring front suspension configurations where camber and caster correction is needed during alignment service. For certain applications, the notes call for installing the 0.00 degree sleeve MS40045 first to determine the required change, then installing the correct sleeve.

This part cross-references Dorman - OE Solutions 545-126 for the same application. The Mevotech MS40041 is a practical replacement for alignment correction on Ford Excursion and Ford Super Duty front suspension service, as well as Dodge Ram 2500 and Ram 3500 front axle alignment work.

What It Helps Correct

• Front wheel camber that is out of specification
• Front caster settings that need adjustment after suspension service
• Alignment issues on solid axle, leaf spring truck front ends
• Steering pull caused by incorrect front geometry
• Tire wear related to improper alignment angles

Installation Notes

• Fits 2000-2005 Ford Excursion, front; hex head adjustment; plus or minus 0.25 degree camber and/or caster
• Fits 1999-2004 Ford F-250 Super Duty, front; with solid axle and leaf spring; hex head adjustment; plus or minus 0.25 degree camber and/or caster
• Fits 1999-2004 Ford F-350 Super Duty, front; with solid axle and leaf spring; hex head adjustment; plus or minus 0.25 degree camber and/or caster
• Fits 1994-1999 Dodge Ram 2500, front; hex head adjustment; plus or minus 0.25 degree camber and/or caster
• Fits 1994-1999 Dodge Ram 3500, front; with monobeam front axle; hex head adjustment; plus or minus 0.25 degree camber and/or caster
• Fits 1999 Ford F-250, front; hex head adjustment; plus or minus 0.25 degree camber and/or caster
• Fits 1992-1997 Ford F-350, front; hex head adjustment; plus or minus 0.25 degree camber and/or caster

Use the listed vehicle notes to confirm axle and suspension configuration before installation. The adjustment sleeve selection is part of the alignment process, so verify the required correction during setup. Part number MS40041 should be matched to the exact application and front suspension layout.

Quality Assurance

Mevotech supplies suspension and steering service parts for alignment and chassis repair applications. MS40041 is built as an adjustable alignment component for the specified Ford and Dodge truck fitments, with dimensions and application notes provided for accurate service selection.