Mevotech MS40068 Alignment Caster / Camber Bushing - Front

Mevotech MS40068 Alignment Bushing

Mevotech MS40068 is an adjustable alignment caster/camber bushing built for suspension alignment correction where precise geometry matters. With a 0.876 inside diameter and 1.63 outside diameter, this bushing is sized for applications that require controlled fitment and repeatable adjustment.

Compatible With alignment service on vehicles such as Honda Civic and similar applications that use this style of caster/camber bushing, MS40068 supports accurate suspension setup when camber or caster angles need correction. This part cross-references Gates 23238 for the same application.

Key Features

• Adjustable caster/camber bushing for suspension alignment correction
• Inside diameter: 0.876 in.
• Outside diameter: 1.63 in.
• Mevotech MS40068 for alignment-focused suspension service
• Cross-reference: Gates 23238

Detailed Description

Mevotech MS40068 is an alignment caster/camber bushing used to fine-tune suspension geometry during alignment work. The adjustable design allows the technician to set the bushing position to achieve the required caster or camber correction, making it a practical choice for vehicles that need suspension angle adjustment after wear, replacement, or collision-related service. If you are searching for a caster camber bushing for Honda Civic alignment service or a Mevotech MS40068 replacement, this part provides the dimensional specifications needed for application matching.

What It Helps Address

• Improper camber readings during wheel alignment
• Caster angle correction after suspension service
• Steering pull caused by alignment geometry issues
• Tire wear linked to incorrect suspension angles
• Alignment adjustment needs on Honda Civic and similar applications

Installation Notes and Tips

Verify inside diameter and outside diameter against the original bushing before installation. Because this is an adjustable alignment component, final positioning should be set during a professional wheel alignment. Confirm vehicle-specific suspension requirements for the exact application before ordering MS40068.

Quality Assurance

Mevotech manufactures suspension and steering components for alignment service applications, and MS40068 is built to meet the dimensional requirements listed above. Use the part number MS40068 and the interchange reference when confirming the correct replacement for your vehicle.