Mevotech MS500164 Alignment Caster / Camber Bushing - Front

Mevotech MS500164 Alignment Bushing

Restore front-end alignment control with the Mevotech MS500164 caster/camber bushing. This adjustable alignment bushing is built for front suspension correction on a wide range of classic trucks and SUVs, including Ford Bronco, Jeep CJ7, and Chevrolet K5 Blazer applications.

With an inside diameter of 0.78 and an outside diameter of 1.5, this bushing is used to fine-tune camber and caster settings during alignment service. It provides plus or minus 1.00 degree of camber and/or caster adjustment for vehicles that need precise front suspension correction.

Key Features

• Adjustable caster/camber bushing for front suspension alignment
• Inside diameter: 0.78
• Outside diameter: 1.5
• Provides plus or minus 1.00 degree of camber and/or caster adjustment
• Fits a broad range of Ford, Jeep, Dodge, Chevrolet, and GMC front applications
• Mevotech MS500164 part number for alignment service and replacement matching

Detailed Description

The Mevotech MS500164 is an alignment caster/camber bushing used to correct front suspension geometry on vehicles that require adjustable alignment settings. It is a direct-fit solution for many older 4x4 and truck platforms, including Ford F-100, F-150, F-250, Bronco, Jeep CJ5, CJ7, Cherokee, Wagoneer, and Chevrolet K5 Blazer models. This part cross-references Monroe Shocks & Struts (e.g., K934, 23008) for the same application.

Use the MS500164 when front camber or caster needs to be brought back within specification after suspension wear, steering component replacement, or alignment service. The Mevotech MS500164 is commonly selected for front-end correction on Dodge Ramcharger, W-series trucks, and Jeep J-series vehicles where adjustable alignment is required.

What It Helps Correct

• Front wheel camber that is out of specification
• Front caster settings that need adjustment
• Steering pull caused by alignment imbalance
• Uneven tire wear related to incorrect front geometry
• Alignment issues after suspension or steering service

Installation Notes and Tips

Install the bushing at the front suspension location and set alignment angles according to the vehicle’s service specifications. Because this part is adjustable, final camber and caster settings should be verified on an alignment rack after installation. Confirm the inside diameter and outside diameter match the original suspension design before service.

Compatible With front applications on 1966-1979 Ford Bronco, 1966-1976 Ford F-100, 1973-1979 Ford F-250, 1976-1979 Ford F-150, 1972-1983 Jeep CJ5, 1976-1986 Jeep CJ7, 1974-1988 Jeep J10, 1974-1988 Jeep J20, and 1975-1986 Chevrolet K5 Blazer models.

Quality Assurance

Mevotech manufactures suspension and steering components for alignment service applications, and the MS500164 is built to support precise front-end adjustment on listed vehicles. Verify fitment by year, make, model, and front position before installation.