Mevotech MS80005 Alignment Shim - Front

Mevotech MS80005 Alignment Shim

Mevotech MS80005 is a front alignment shim for camber and caster adjustment on select Dodge and Ford applications. It is a Duo-Fit shim with a 1.59 mm (1/16 in) thickness and is specified for OE bolt sizes from 11 mm to 13 mm (7/16 in to 1/2 in) diameter.

This alignment shim is used in front suspension hardware setups where precise camber and caster correction is needed. It cross-references Mevotech Supreme MS80005 and 19344907 for the same application.

Key Features

• Front alignment shim for camber and caster adjustment
• Duo-Fit design for select OE bolt sizes
• 1.59 mm / 1/16 in thickness
• 25 shims per package
• Mevotech part number MS80005

Vehicle Fitment

• Fits 1983-1993 Dodge Ram 50, front. Camber / Caster Duo-Fit Shims - Qty. 25 per pkg.; 1.59mm or 1/16in Thickness; OE Bolt Size Of 11mm To 13mm / 7/16in To 1/2in Diameter
• Fits 1987-1989 Dodge Raider, front. Camber / Caster Duo-Fit Shims - Qty. 25 per pkg.; 1.59mm or 1/16in Thickness; OE Bolt Size Of 11mm To 13mm / 7/16in To 1/2in Diameter
• Fits 1982 Dodge D50, front. Camber / Caster Duo-Fit Shims - Qty. 25 per pkg.; 1.59mm or 1/16in Thickness; OE Bolt Size Of 11mm To 13mm / 7/16in To 1/2in Diameter
• Fits 1975-1982 Ford Courier, front. Camber / Caster Duo-Fit Shims - Qty. 25 per pkg.; 1.59mm or 1/16in Thickness; OE Bolt Size Of 11mm To 13mm / 7/16in To 1/2in Diameter

What It Is Used For

• Front camber correction on Dodge Ram 50 suspension hardware
• Front caster adjustment on Ford Courier alignment setups
• Restoring alignment after suspension service or component replacement
• Fine-tuning wheel angle settings on Dodge Raider and Dodge D50 applications
• Addressing uneven tire wear caused by incorrect alignment angles

Installation Notes and Tips

Verify OE bolt diameter before installation and match the shim thickness to the alignment correction required. Use the vehicle-specific front suspension hardware layout for the listed Dodge and Ford models, and confirm final camber and caster settings with a proper alignment procedure after installation.

Quality Assurance

Mevotech MS80005 is a cataloged suspension hardware part for the listed applications and is identified by the MS80005 part number for direct reference during ordering and service lookup.