Mevotech MS86013 Alignment Shim - Rear

Mevotech MS86013 Rear Alignment Shim

Mevotech MS86013 is a rear alignment shim used to fine-tune toe and camber settings on select Nissan and Toyota applications. It is a full contact shim built for precise suspension alignment correction on vehicles that need measured adjustment at the rear axle.

Key Features

• Full contact alignment shim for rear suspension adjustment
• Provides toe adjustment of plus or minus 0.38 degrees on select Nissan LEAF and Nissan Juke applications
• Provides camber and/or toe adjustment of plus or minus 0.25 degrees on select Toyota Sienna applications
• Fits rear position applications only
• Mevotech MS86013 cross-references K100241 for the same application

Detailed Description

Mevotech MS86013 is an alignment shim for rear suspension geometry correction on 2011-2015 Nissan LEAF, 2011-2014 Nissan Juke, and 1998-2010 Toyota Sienna models. Use this part when rear toe or camber settings need to be brought back within specification after suspension service, component replacement, or alignment correction. The MS86013 part number is a direct reference for this rear alignment shim application.

Compatible With: Fits 2011-2015 Nissan LEAF, rear; Fits 2011-2014 Nissan Juke, rear; Fits 1998-2010 Toyota Sienna, rear. Mevotech MS86013 is built for these specific rear alignment applications and should be matched to the vehicle’s alignment requirements before installation.

What It Helps Correct

• Rear toe out of specification
• Rear camber or toe angle correction on Toyota Sienna applications
• Alignment drift after rear suspension repairs
• Uneven tire wear caused by incorrect rear geometry
• Steering pull or tracking issues related to rear alignment settings

Installation Notes

Install MS86013 at the rear suspension location specified for the vehicle and verify alignment settings after installation. Confirm the required adjustment range before use, since Nissan LEAF and Nissan Juke applications call for toe adjustment of plus or minus 0.38 degrees, while Toyota Sienna applications call for camber and/or toe adjustment of plus or minus 0.25 degrees. Final alignment should be checked with proper measuring equipment.

Quality Assurance

Mevotech MS86013 is an OE-style alignment hardware solution for targeted rear suspension correction. This part cross-references K100241 for the same application.