Mevotech TXMS25656 Steering Tie Rod End Assembly - Front

Front Steering Tie Rod End Assembly

Mevotech TXMS25656 is a front steering tie rod end assembly for Ram and Dodge Ram heavy-duty trucks with complete linkage from the Pitman arm. It is built with a pre-greased design, a grease fitting, and a greaseable service setup to support routine maintenance on the steering system.

Compatible with 2009-2013 Ram 2500 and Ram 3500 front applications, this assembly includes a dust boot, mounting hardware, a locking nut, and an adjusting sleeve. The threaded stud design and sintered metal bearing construction are specified for direct steering linkage service on Ram 2500 and Ram 3500 platforms.

• Pre-greased for initial service readiness
• Grease fitting included for future lubrication
• Dust boot included with neoprene boot material
• Mounting hardware included
• Locking nut included
• Adjusting sleeve included
• Greaseable design for maintenance access
• Threaded stud type with sintered metal bearing
• Green boot color for easy visual identification

Detailed Product Overview

Mevotech TXMS25656 is a steering tie rod end assembly engineered for front linkage service on Ram 2500 and Ram 3500 trucks. It cross-references Mopar 52122362AL and MOOG Chassis Products DS800981A for the same application. The assembly is pre-greased and includes a grease fitting, neoprene dust boot, locking nut, mounting hardware, and adjusting sleeve to support a complete steering linkage repair. Mevotech TXMS25656 is a direct-fit service part for 2009-2013 Ram 2500 and Ram 3500 front steering systems with complete linkage from the Pitman arm.

Common Repair Symptoms

• Steering play or looseness in the front linkage
• Clunking or knocking from the steering system
• Uneven tire wear linked to worn tie rod components
• Loose or unstable steering response on Ram 2500 and Ram 3500 trucks
• Visible wear at the dust boot or steering joint

Installation Notes

Verify vehicle application before installation. This part is listed for front use on 2009-2010 Dodge Ram 2500 and Ram 3500, and 2011-2013 Ram 2500 and Ram 3500 with complete linkage from the Pitman arm. Because the assembly includes an adjusting sleeve and locking nut, alignment should be checked after steering component replacement. Confirm the threaded stud orientation and grease the joint during service if required by the maintenance schedule.

Quality Assurance

Mevotech TXMS25656 is part of Mevotech’s TTX line and is built with serviceable steering hardware, including a greaseable joint and protective neoprene boot. The design supports repeat lubrication and inspection during normal chassis maintenance.