/live/media/ME/ME_TXMS25665_Fro.jpg)
Mevotech TXMS25665 Steering Drag Link - At Spindle
| Brand | Mevotech TXMS25665 |
|---|---|
| Position | At Spindle |
| Maximum Diameter | 1.57 |
| Pre-Greased | Yes |
| Castle Nut Included | Yes |
| Dust Boot Included | Yes |
| Grease Fittings Included | Yes |
| Boot Material | Neoprene |
| Adjustable | No |
| Bearing Type | Sintered metal |
| Greaseable | Yes |
| Adjusting Sleeve Included | Yes |
| Boot Color | Green |
| Thread Size | M14 - 1.5 |
| Fits | Jeep · 8 vehicles |
Pre-greased design. Ready for installation with grease fittings and a dust boot included.
Greaseable joint. Allows routine lubrication to support smoother steering operation.
Neoprene boot included. Helps shield the drag link from dirt and moisture.
Cross-references Mevotech TTX TXMS25665, 19474607 and 68258759AA for the same application. See all 5.
Steering Drag Link for Jeep Wrangler
The Mevotech TXMS25665 is a steering drag link for the 2018-2025 Jeep Wrangler at spindle applications. It is built with a pre-greased design, a neoprene dust boot, and greaseable service points to support steering linkage maintenance on the Jeep Wrangler platform.
Key Features
- Direct-fit steering drag link for 2018-2025 Jeep Wrangler, at spindle
- Pre-greased for initial service readiness
- Grease fittings included for routine lubrication
- Dust boot included with neoprene boot material and green boot color
- Castle nut included
- Adjusting sleeve included
- Sintered metal bearing type
- Maximum diameter: 1.57
- Thread size: M14 - 1.5
Detailed Description
Mevotech TXMS25665 is a steering drag link engineered for Jeep Wrangler steering service at the spindle. It includes a pre-greased construction, grease fittings, a dust boot, a castle nut, and an adjusting sleeve, giving you the core components needed for a steering linkage replacement on 2018-2025 Jeep Wrangler models. The sintered metal bearing type and greaseable design support regular maintenance, while the neoprene boot helps protect the joint area from road debris and moisture.
This part cross-references Mopar 19474607 and 68258759AA for the same application. The Mevotech TTX TXMS25665 designation also identifies this steering drag link within the Mevotech TTX line.
Common Issues This Part Can Address
- Excessive steering play in the Jeep Wrangler steering linkage
- Loose or worn drag link joint movement at the spindle
- Grease loss or contamination at the steering joint
- Boot damage that exposes the joint to dirt and moisture
- Steering response problems caused by worn linkage components
Installation Notes and Tips
Fits 2018-2025 Jeep Wrangler, at spindle. Verify thread size M14 - 1.5 and confirm the existing steering linkage configuration before installation. Because this drag link is not adjustable, set steering alignment and linkage position according to the vehicle service procedure after replacement. Use the included grease fittings to service the joint at regular intervals.
Quality Assurance
Mevotech TXMS25665 is part of the Mevotech TTX steering component line and is built with serviceable, greaseable construction for routine maintenance on Jeep Wrangler steering systems.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2025 | Jeep | Wrangler | At Spindle | — |
| 2024 | Jeep | Wrangler | At Spindle | — |
| 2023 | Jeep | Wrangler | At Spindle | — |
| 2022 | Jeep | Wrangler | At Spindle | — |
| 2021 | Jeep | Wrangler | At Spindle | — |
| 2020 | Jeep | Wrangler | At Spindle | — |
| 2019 | Jeep | Wrangler | At Spindle | — |
| 2018 | Jeep | Wrangler | At Spindle | — |
| No rows match your filter. | ||||